Putting a 2002 frame on a 1st Generation Intimidator

[The Inflicted]

I'm curious what frame parts are and aren't compatible between the 1st generation Intimidators and the 2002 models. Triggers? Solenoids? Button membranes and LCD screens? What all is needed besides the frame?

[Frmrspec]

There’s different boards depending on what frame you are using. If you’re using anything after the 2K2/Alias then the boards are basically all the same shape/fit.. but the gen1/GZ frames are a bit more restrictive.

triggers are all the same and IF you can change a trigger guard then those are universal as well.

unfortunately the wiring harnesses are very different depending on what board/setup you’re planning to use.

[The Inflicted]

I've got a WAS board in the gun now, so that I know for sure is compatible.

What about the solenoid? That's the big bit I can't make myself.

[Frmrspec]

Solenoids are all universal..

[Ecapnation]

Should be a 1 to 1 swap aside for some screws and some triggers