MK4 Morlock Board in a 2k5 Intimidator Frame

[capedcrayola]

Just checking if anyone has managed to install an MK4 morlock in a 2k5 intimidator frame and if you'd share how you did it.

[smasher41]

I plan to do this soon myself.

Should be fairly straight forward once wiring is made up since the 2k5 frame has pre tapped holes for the microswitch to bolt into. The external screen can mount on the other side of the plate in the screen window.
My idea is to 3d print an ABS plate where the membrane pad sits, and either use a slide switch ( like a 2k2 style timmy) or mount a momentary or even possibly a latching switch for power button, haven't decided which route yet.
lastly if I use a Lipo then I'll get a small remote USB port mounted on the "membrane plate" as well, possibly with a TPU port cover like Dye did with the M2/m3 series, this will reduce any need to open up the frame as much as possible.

[capedcrayola]

Keep me posted with how it goes, please. I'd really like to see what you cook up.

[turpidporpoise]

Ive actually got one sitting inside a 2k5 frame right now waiting for a few extra minutes so I can work on it a bit. My plan was the same as the guy above where I’ll 3d print a mount for a 2k2 slide switch in the membrane pad location but I was planning to use a regular 9v battery instead of a lipo