Anyone got an Aegis/Avenger VL marker handy?

[dartamon]

Can you measure the diameter/threads on the volumizer? I'm curious if it fits a raptor.

[DavidBoren]

Be advised that the vertical ASA threads from this family came in both left and right handed threads...

[Fubarius]

Volumizer threads on Avenger are the same as, or close enough to those on a spyder. Way bigger than a Raptor.

I vaguely remember Diamond Labs may have made one for a Raptor back in the day, but that would be rediculously had to find. The F1 was the inspiration for the Raptor, but they stopped making those before volumizers were a thing. The F4 should have a smaller front plug like a Raptor, and a few volumizers were made for that, but still hard to find and might not be exactly the same threading.

So what's the end goal? Raptor already have a pretty large valve chamber volume.

[MrKittyCatMeowFace]

In my case to make the marker look pretty
Im gonna look into if a f4 front volumizer will thread into a raptor. Your right about diamond labs, they made valves to for the raptor and bolts I believe too.

[dartamon]

Yeah, they did, but diamond labs closed in like 99 and became tribal for a while. Rhine Joe also made them, but that's even more difficult to find. F4 or Griffin may be worth a try.

[wthomas333]

There is a new one on eBay for an F4, but those threads don’t look the same as a Raptor. I once tried a valve plug from an F1, but it didn’t fit.

https://www.ebay.com/itm/ACI-Air-Con...YAAOSw0~de3X0a

[dartamon]

Looks like it'll have to be a custom job.