Warpfeed rainmaker

[Biofrost]

Got the old rainmaker back out and cleaned it up. i know its a rare combo with a 1of2 warpfeed body and a 1of3 pump kits as far as i know is it worth anything these days?

electro pics is how i got it way back when
-Warp Feed Rainmaker


also has Marty Mods

[dartamon]

Meh. The purple warpfeed that Doc Nickel made for Kevmaster is worth something. I'm not sure about this one.

[Jordan]

Pump kits are $75-100 depending on how complete, warp bodies are whatever someone is willing to pay.

Very few players run warps anymore, you'd need to find a die-hard who also liked RMs... I had the other Rainman warp body, built it into a gun, and decided it was way too much of a PITA to deal with a RM and a warpfeed at the same time. I traded it for the equivalent of a couple hundred bucks in other paintball stuff.

[Nish]

Wow I haven't seen that gun in a LONG time!

[Meleager7]

i've got the 2of2 WarpFeed RM body then! I'll post a few pics up later.

My gun had a proper going through (mad marty mods, serviced regs, etc) by Jordan before he traded it to me, so its been a low PITA factor thus far.

I had a brief feeding issue using the Warp but it turned out it was the Powerfeed plug that came with the Pro Team warp adapter I was using. As soon as I switched to an AGD plastic warp adapter, the feeding problems went away...and the Rainmaker has plenty of kick to trip the Warp vibration sensor.

FYI, i moved that Pro Team warp adapter to my micromag warp setup and the feeding problem followed, but was able to swap out the Plug, and replace with an AGD powerfeed plug, and that resolved the feeding issue there. Not sure what's up with the those PTP plugs!??

Anyhow, hope to get out for one more day this season, and make it a warp day!

[Biofrost]

i've got the 2of2 WarpFeed RM body then! I'll post a few pics up later.

My gun had a proper going through (mad marty mods, serviced regs, etc) by Jordan before he traded it to me, so its been a low PITA factor thus far.

I had a brief feeding issue using the Warp but it turned out it was the Powerfeed plug that came with the Pro Team warp adapter I was using. As soon as I switched to an AGD plastic warp adapter, the feeding problems went away...and the Rainmaker has plenty of kick to trip the Warp vibration sensor.

FYI, i moved that Pro Team warp adapter to my micromag warp setup and the feeding problem followed, but was able to swap out the Plug, and replace with an AGD powerfeed plug, and that resolved the feeding issue there. Not sure what's up with the those PTP plugs!??

Anyhow, hope to get out for one more day this season, and make it a warp day!

I am planning to hook a switch of some sort to direct feed the warp and not rely on the vib but the main thing I want is a regless back block anyone know where i could score one,also in dire need of an oring kit for it

[Meleager7]

Here is the other one, my # 2 of 2 warp feed Rainmaker, as promised !

[gabe]

My arms ache just looking at those

[Magoo]

Oh dang. That's my old gun. Bought it off of Rainman. You still have the electronics? That Painmaker board is a rare bird. Super cool to see this pop back up.

[Jordan]

My arms ache just looking at those

That's why I sold it.

[Meleager7]

Rainmaker arm