Colt 45 style back-slide mode for Phantom

[ReconSWS]

[NONOBLITUS]

Whoa !!! That’s cool.

[AnarchicArctic]

Slick. I’m in.

[808Jackal]

The voice over for the video was soothing. If you ever come out with one that allows for the 10 round feed I'll be on that!

[moving_target]

I would imagine you could do something similar to a duck slide feed system and you'd be all set, other than all of the drawbacks of that kind of system

[Jonnydread]

It has Twin Peaks vibes

[IndustrialHalo]

Very slick. Would be neat for dueling pistols and limited paint games. If you wanted to mount a feed it looks like it would have to attach to the slide unless you clearance the top of the slide in front of the feed port and use a small spacer.

[cook2kill]

did this ever happen?

[Carp]

did this ever happen?

Short answer....yes. But, ReconSWS has been MIA since 12/20/2021. It's unfortunate because, he made a lot of cool pump handle variants.

[JeepDVLZ45]

Didn’t he change his SN? Or am I making that up.

This would be truly badass if it was air assisted in the blow back. Hand load and hand release but pull
The trigger and the pump blows back and locks…

[Carp]

JeepDVLZ45 He liked making multiple accounts. 😖 Some of his other accounts... @iiterator<> (created on and also inactive since 4/6/2021), Gideon (created on and also inactive since 1/11/2021)...there may be others.

Edit...Yep, found another.... Asset(s)Deployed (last active on 1/27/2022)

[Chuck E Ducky]

I got one from him it’s pretty cool. You have to be careful to keep the print out of the car as it can warp in real hot temps like an inclosed car. I found it the other day when I was organizing my collection. He printed my handle into the side and made two different mock suppressors for it. I should put it together I probably have enough phantom parts laying around. I purchased it threw his Etsy account. Maybe try messaging him there.

I forgot where he lived but it came from outside the US I remember that.

[Carp]

He hailed from the Toronto area, in the land of Maple and Mooses. His ReconSlide(s) for the Trracer/Maverick and Phantom are some of my favorites.

[Chuck E Ducky]

Yeah I got a recon slide too. They were reasonably priced too. Maple and Mooses lol

[Have Blue]

I got one from him it’s pretty cool. You have to be careful to keep the print out of the car as it can warp in real hot temps like an inclosed car.

Sounds like it's printed in PLA, which is why I've gone to such pains to print my offerings in ASA - PLA warps bad in heat, creeps under pressure, etc.. Love the design, though!!