Stock Mounted 12 Gram Holder?

[Sottyman]

Did anyone ever make something that clamped onto the CCI stocks that held a few extra 12 grams (like the RTR Quad/Knuckle/Boomerang)? Not exactly something I NEED, but one of those nifty things if it ever existed. Worst case, I suppose I could snag a Quad and just drill/tap my stock to mount it...

Edit - Has anyone snagged one of the Knuckles or Boomerangs, installed on the CCI frame, then installed their stock?

[Havoc]

I have done the boomerang and the knuckle. I prefer the knuckle installed on the left side doesn't interfere when holding the marker in my right hand, but the 12gms do rub my hand if I hold with my left hand. The boomerang is awesome mounted on the right side facing forward right next to the bucket changer makes for a really quick 12gm swap but does add a little more of a target when you come out of a bunker to the right.

[Havoc]

[Sottyman]

Havoc , can you possibly upload a picture(s) of the Knuckle installed? I'm just not sure how much clearance there is from the outer edge of the OEM Hogue grips to the 12 grams. My hand is smaller than yours but I just wasn't sure if things would feel cramped or not!

-Mike

[Havoc]

I will later tonight when I get home

[Sottyman]

Thank you!!

[Havoc]

[Sottyman]

Thank you!! I have a lead on one...gunna try it out.

[Havoc]

Rtr has them in stock and there barrel bags are great too
https://remembertheronin.com/shop/

[Havoc]

If I use my left hand I just grip over the 12gms it's a little awkward but its usually only a shot or two

[Sottyman]

Really do appreciate it! I don't shoot non-dominant much, so doesn't look like it's too cumbersome for the rare occurrence I do

[Cunha]

It does seem like an RTR style 12 gram holder but mounted on the CCI T stock would be a great place to hold 2 or 4x 12 grams that could be accessed with either hand in the same quick manner of the other RTR 12gram holders.

[Sottyman]

I have an RTR Knuckle on the way from a forum member and will try it mounted between the bottom of the grip frame and stock. If that doesn't work, I was debating drilling and tapping my stock for it!

[Chuck E Ducky]

They bolt right up may just need longer mount screws. RTR has both styles in stock. The grip frames all have the same mount holes in both the CCI,CCM,and RTR so as long as can mount a stock you can mount a 12g holder between the stock and grip frame.

[Sottyman]

Sorry, should have clarified. I know they'll physically bolt up no problem. It just seems like the Knuckle puts the 12 grams REALLY close to the grip frame. Without seeing it in person I won't know for sure, but my initial thoughts are RTR should have made them sit out another 1/4" to 1/2". But again, we shall see!

[Impactfour]

For anyone still look Stryker on Etsy sells 3d printed 2x12 gram that fits my phantom with the t-stock

[Chuck E Ducky]

You can get aluminum ones for $20-$25

https://remembertheronin.com/shop/?removed_item=1