Brass Sleeves

[waffles2]

I’ve been looking to get my hands on a flared brass sleeve that aggroman made.

Do you know where I could get my hands on one or how I can make one myself?

[gabe]

I've got one kicking around I'll send you but it doesn't have the flare on the front. It's just the straight tube. They kind of press into the frame so no need for the flare.

[Darknite667]

If you have the brass from a fired .22 lr and drill out the back it also works well.

[FrankW]

You can also buy brass tubing from a hobby shop and cut it down.

[XEMON]

I have some of the tubing, let me know if you don't find any anywhere ... I need to make a few for myself ...

[Dirklax39]

XEMON what size brass tubing have you found that works well?

[XEMON]

I don't have them handy, but I'll post spec and pic when I get a chance.
You can also go to your hardware size with a 10-32 screw to find the right one

[Dirklax39]

waffles2

https://www.mcarterbrown.com/forum/paintball-news-aa/the-armory/cci/233908-brass-phantom-shims-now-available