Stock class feed

[XEMON]

Hello y'all,

Finally got a Phantom again 🥳

It got a clear stock class feed ... With a crack in it ...
Also, it looks like it's a cram'n'jam feed (no threads) and someone tried to thread the feed tube into ...

So, before it shatter in multiple pieces, are replacement available?
Any 3D printed options/file available?

Thanks MCB X

[Rainmaker]

Just made this yesterday. Im gonna put the file on thingiverse once I tweak one part.

[gabe]

Just FYI none of the CCI stock class feed blocks have threads. You basically just thread the feed tube in to make threads. Oh and the clear acrylic is more brittle than the black plastic so they tend to crack at the bottom against the body from the rear to the screw hole. 100% normal for that setup. I've had several phantoms with clear acrylic SC feeds and they've all been like this.

[XEMON]

Rainmaker :
That reverse feed looks great gabe
thanks for the info, I didn't knew.




So I know I have a serious problem ... Well kinda ...
After thinking about this, I vaguely remembered getting a cram'n'jam feed for a Sheridan project that never happened ...
Got home today and decided to look for it, to my surprise I found it rather quickly ... And to my even bigger surprise there was a spare feed gate, with a spare tip assembly with the 10rd tube and sight 🤯
So now I have the 15rd matching and a 10rd with a good feed neck and a spare ... Awesome

Might still have to try that reverse feed ...

[gabe]

Never understood the fascination with shorter phantom feeds. I really like 15 rounds on the gun so I can top off with 10 rounders with a partial load of paint still in the gun.

[Menso]

Never understood the fascination with shorter phantom feeds. I really like 15 rounds on the gun so I can top off with 10 rounders with a partial load of paint still in the gun.

I don’t know how anyone can stand that damn 15 round tube up against their mask the entire time you’re pointing it.

[Yamess191]

I don’t know how anyone can stand that damn 15 round tube up against their mask the entire time you’re pointing it.

You must hold the marker awful close to your face. Don’t do with a 357 or 44 magnum, you will end up with a broken cheek bone! I guess we all have different holds that we are used to.

[XEMON]

At the risk of throwing oil on the phantom fire, I'm having a hard time with the rock forward ...


But in term of feed length, the 15 are a bit more practical, but the 10 are more aesthetic ... At least to me ...

[JeepDVLZ45]

I’m right there with you!! I have an apocalypse feed for mine for rock-back....and I love it so far. It is much easier for me then rock-forward.

IMHO the 15 rounder fits nicely and is aesthetically pleasing in that configuration (especially the dual feed) . It might looks a little funky with a clear pump handle though...

[Stilgar]

At the risk of throwing oil on the phantom fire... At least to me ...

no!

Lol, you are not wrong

I personally prefer the 12rnd option

[XEMON]

I didn't knew there was 12rd length ... Perfect combo of the 2 😁

And always wanted to try the apocalypse feed ... But it might look wired not matching the rest of the gun ...

[Stilgar]

12 is the new one piece feed.

Or a cut down 15

[Menso]

You must hold the marker awful close to your face. Don’t do with a 357 or 44 magnum, you will end up with a broken cheek bone! I guess we all have different holds that we are used to.

Yeah? How else am I supposed to hold a Phantom if I’m not running it with a stock? Isosceles? Weaver?

Besides, I’m not shooting real steel anytime soon with these ammo prices.