Loose Autotrigger Cam

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • commandercup
    Newbie
    • Oct 2026
    • 15

    #1

    Loose Autotrigger Cam

    Hey all,

    My autotrigger cam is sort of wiggly/loose and jiggles in place if you push it. How "firm" or "solid" are these supposed to be? I bought a used S6.5 with a 86 snatch frame and it was missing the AT cam retaining pin, but I have since replaced it and it's still just as loose. I've tried fiddling with the undertravel screw too but it hasn't made much difference.

    I've been troubleshooting some other small issues, but I think it's mostly a non-issue and I just want to make sure it doesn't develop into one. I think in some rare cases I've noticed that the cam will rotate out of its normal position and I won't be able to pull the trigger even when the pump handle is forward.

    Any tips/pointers is appreciated! I think I've watched literally every single one of TF's CCM videos (thank you!) at this point haha.
  • Chuck E Ducky
    Ragnastock Enforcer
    • Jul 2020
    • 6368
    • NY

    #2
    Post some pictures of what you have. It depends on your setup (frame, AT cam / arm , and Pump rod)

    How long was the A/T cam retention pin missing? Is it possible it damaged the area it sits in causing excessive slop. Are you using a Delrin trigger under extreme conditions they can wear out? Possibly faster if your AT cam was fighting the mechanics of the entire process. I have never wore one out but I dont really lean on A/T all that much. But I have seen it on older more ruff played markers.

    Make sure your marker fires 1/8'' before the bolt is fully forward. (Timed properly)

    Comment

    • JohnB
      Pump, pump, pump it up
      • Jul 2020
      • 349
      • Phx

      #3
      I agree with photos and knowing what parts in particular. I feel like my 6.5 is pretty solid and doesn’t move too much. I have some cocker top and ccm lowers built up and one of them just holds in by the screw in the pump arm, so that one is pretty jiggly.

      Comment

      • Chuck E Ducky
        Ragnastock Enforcer
        • Jul 2020
        • 6368
        • NY

        #4
        Yeah the ones that are held in by a shoulder screw are definitely more sloppy however it don’t effect things unless the pump arm isn’t aligned properly. That’s why I’m curious what version he’s talking about.

        Comment

        Working...