So now that it seems DP is officially gonzo, I wanted to start accumulating some resources for the future, including hosting a few manuals and listing known o-ring sizes. This top post will be a "table of contents" and just link to individual posts with further information.
-
RAPS On/Off ASA
O-Rings:
-008 x 1
-009 x 1
Not "technically" the exact oring according to DP's tech sheet, but both work and hold air.
Requires a 5/64 hex drive to remove screw that holds lever on.
US Patent No. 7156135B1
Side note: These are great for making pressure testers due to the quick on, quick off, and venting nature. -
G5 (and all sub-variants)
These O-Ring sizes are based of a teardown of my own G5 Spec-R.
Bolt/Dump valve:
-022 x 1
-020 x 1
-018 x1 (internal body)
-017 x 2 (internal body)
-015 x 1
Regulator/Foregrip assembly:
-019 x 2
-015 x 1
-013 x 2
-007 x 1
Reg seat appears to be proprietary, soft though, could be easily cut/made.
I can't find an official manual for the Spec-R variant w/OLED screen, but the programming is the same as the "Elite" OLED board.
DP_G5_Manual.pdfComment
-
Fusion Elite
Regulator/Foregrip assembly (similar to G5):
-019 x 2
-015 x 2
-013 x 2
-007 x 1
DP_Elite_Manual.pdfComment
-
-
Comment
-
-
-
Comment
-
Comment
-
-
DP 7th Element Board for G3 manual:
Comment
Comment