Tadao Matrix 3/4/5.0 LED Board Manuals - Musashi 3 & 6

[the_matrix_guy]

Tadao 3/4/5.0 Matrix Board Manual

[the_matrix_guy]

Tadao M6 Matrix Board Manual

[the_matrix_guy]

Tadao 4.0 (1st gen) LED Matrix Board Manual


Push switch to turn on & off (board defaults to eyes)

Click trigger 3 times to turn eyes off with nothing in breech

To enter programming mode push the button above LED (tourney lock)

Use trigger to toggle between the modes (LED colors)

To change value hold trigger until LED turns off (it will then show current value) after current value is shown click trigger for corresponding value change.

Turn board off to exit programming mode.

Programming is as follows:



Color........................Value...................< - >.................Default




Green.....................Debounce...............1-25.....................4

Purple....................Front pulse..............10-25....................14

White....................Back pulse...............20-50....................45

Yellow...................Loader delay.............1-25.....................1

Teal......................ABS time.................5-30......................8