DM3/Gen-E matrix overpressure leak

[russc]

I think I overpressurized my Gen-E matrix today. Was messing around with the devil detonator and when I aired it up I heard a pop and major leak.

Is that probably just a bolt o-ring? Or do I have to worry about the solenoid? Do those tend to blow out?

[Tracker]

ive blown out a noid before.. but i quickly put it back together, and it ran fine, no permanent issues (one of the gaskets under the endcap had popped out between the pieces)

[Alexndl]

Did you fix it?

If its the solenoid I know someone that have a pile of spare he could sell

Let me know if you need one

[gabe]

It's possible it's a bolt o-ring if you were cranking up the HPR. The tophat o-rings are susceptible to blowing out but it's rare.

Very likely a blown solenoid manifold gasket although they usually don't leak too loud. Normally a pretty small leak. Worth it to rebuild the bolt with fresh o-rings before pulling apart the noid and solenoid manifold.