Dye Dye DM5 DM6, DM7 - Rebuild parts from Europe?

[amakinen]

Hello,

My gear has been in the bags for way too long and I want to revive them.

I have DM5, DM6, DM7 - Where to get the rebuild kits / suitable o-rings for these guns + ball detens? Cannot find the from local dealers or from Dye Europe. Good suggestions? Looking forward on rebuilding these and then considering comeback to field.

Antti

[mooman978]

The orings are standard you should be able to get them anywhere. You can look through the manuals to know what sizes you need but most general oring kits should suffice

[nerdcore]

Orings-online.net ships internationally. I like using them (except i'm here in the states).

Also found this: Dye Universal Coloured O-ring Kit – Just Paintball
Can't believe that's an actual pb store. I bought a Just PB mask bag from ebay years ago, and I thought it was just some random manufacturer.

[PumpMan10988]

Dye's manual page is an excellent resource, the marker specific manuals will list every oring you need.

It looks like Dye even has DM4/5/C detents still.

Regulator seats are another potential concern. ANS gear has them in stock but I don't know about international shipping.

[amakinen]

Thanks for the answers. The REG seats were also something that I was thinking that they needs to be replaced. If someone else has any ideas where to get them internationally - please I would appriciate.

[Sdawg]

Regulator seats are super easy to find because unlike other manufacturers (PE), they used the same spec for years.

[Ecapnation]

Figure out the needed sizes and durometers and by them all from McMaster