Just curious what's out there. Even the stock boards for these seem insanely expensive, I just want something I can make field legal and run.
-
-
Depending on your DIY skills you might consider a Morlock board: https://www.morlockboards.com.
I think I've got at least 2 iterations of these things floating around in my kit for future me when a board goes out and I want to resurrect a marker. -
Pretty sure a cocker board is close. Maybe able to run a scifi board with the correct settings.BeardedWorks.com (Your Inception Designs and Shocktech Dealer)
BW Youtube
BW Ebay
BW Email
I buy Automags and Mag Parts also.Comment
-
I've run with morlocks before on a couple of guns. This one is actually going to be part of a bushmaster trayless resurrection( you can actually run the stock manifold and noid installation pretty easily with the frame slightly milled out). To be honest, if i cant find a 40- 50$ user option, im just going to fab a switch mount behind the trigger and use the bushmaster electronics, I just wanted the convenience of the buttons and screen 😀Comment
-
You might be able to do it in a roundabout way if you find one of the lucky paintball universal boards that uses DM4/5 chips then source a DM chip that can go down that low. Pretty sure some virtues would.
That also being said I'm pretty sure they rate a fire on those goes rather low it can't do 10.5?
Edit: I will dig mine out and check if I couldComment
-
Check your inboxComment
-
Late to the party here but I know for a fact maniac boards on the older egos (pre 09?) the ROF can be capped anywhere from 4 - 25 BPS. I'm nearly positive the stock boards can do that as well but maybe not as high as 25.Comment
-
Every now and then these can be found for $50 or so. I run them in my AKA Ehms, really like these boards.
https://ebay.us/m/J4zVMDComment
Comment