Official Kingman/Spyder Picture Thread

[DavidBoren]

The Evil Spyder...
Spyder Flash:
14" 1pc. Evil Driver barrel (0.689"),
LAPCO 0.685" bore sizer,
Pro-Line mini LPC,
Evil Detonator reg,
Evil valve,
Evil bolt,
TASO single trigger "humpback" frame,
Evil wrap-around grips,
Evil On/Off,
light valve spring from a Warrior kit,
medium mainspring from a Warrior kit,
rear velocity adjuster...

[nerdcore]

Refurbed a buddy's Esprit, and set it up to run air. Kept changes to a minimum to save him money.

32° magna valve
Spring kit
Removed venturi insert from bolt
WGP reg
Powerex 9.6v
Lapco feedneck

[scottieb]

TWINS!

Two AMG's. Both are stock with a 14" Dye aluminum barrel added. I removed the silly small shroud at the barrel's breech.
6A8AF99A-F19D-4A15-B102-6B3C5FD96301.jpeg

Two oldies here. They are fitted with non-insert OTP G-1 barrels rethreaded for OTP G-3 inserts, TASO LPCs, stainless VAs, WGP regs, Millennium single trigger frames, macroline, field strip screws, RVAs, and ported/polished internals.
D95BEE49-049B-4FB0-94B7-90C014229DC3.jpeg

The Brothers Benchmark! All Benchmark/Armson/PTP.
spyder the brothers benchmark.jpg

[scottieb]

AKA Black Widow #16.
21232DB5-FFFF-42DA-9389-AD771EF9DB37.jpeg

-Black classic compact body
-Loads of AKA bits: valve, bolt, rear cage, cocking slot cover, detent cover, and Compact Mitey Max
-NW VA
-Air America Vigilante, 90 - 250psi
-OG Smart Parts barrel
-quite possibly the only single trigger Benchmark Spyder frame you will ever see
-Hogue rubber grips
-Doc's P stock
-longer sight rail from the original Spyders
-Armson red dot sight
-unknown RVA
-ACI duckbill
-macroline
-The usual work over on the inside

IMG_0766.jpg

Custom splash Bob Long Millennium with a number of matching accessories.
millenium spyder custom anno.jpg

[scottieb]

Low pressure Imagine with AKA bits, Hyperframe and Jacko Infinity series barrel.

imagine with hyperframe 1.jpg

Classic with my second Hyperframe:
IMG_0243.jpg

Dual Stabilizers.
IMG_0391.jpg

Convertible Spyder in rifle configuration:

IMG_0639.jpg

Convertible Spyder in pistol configuration:

IMG_0645.JPG

[scottieb]

WITH STOCKS!

Double trigger Dye frame with rubber grips, Shocktech VA, WGP reg, macroline, TASO LPC, Smart Parts Progressive barrel, rear cocking bolt, cocking slot cover, RVA, and stock.
spyder dye frame shoulder stock.jpg

Mostly Lapco bits on this one. Lapco Autospirit barrel, Lapco VA, Lapco stock and drop, WGP reg, stainless line, TASO LPC, Benchmark double trigger frame with rubber grips, and field strip screws.
9F27CA13-F102-4CC8-9042-99A0299CF11E.jpeg

Diamond Labs Spyder. 2 hole Spyder compact with DL double trigger frame with rubber grips, DL LP valve, DL rear cocking bolt, DL rear cage, DL expansion chamber, DL gas through stock, DL ASA, macroline, raised sight rail, field strip screws, and period correct Vortex barrel.
430B8450-E0EA-493E-8EA3-3FCF61F84D39.jpeg

Black Spyder Compact with ProLine .45 block, angled ASA, gas through stock, RVA, PMI sight rail, ported and polished internals, Trinity LPC, Spyder Sonix front block, remote ASA fitted for horizontal air, and Smart Parts stainless All American barrel.
A1CFB03C-28A3-4169-B193-5047FCAC11FD.jpeg

VM-68-esque Spyder. Black Spyder Compact, kit's horizontal air adapter, ProLine "add on" expansion chamber bits, stainless Dye barrel, stainless line, TASO frame with rubber grips, RVA, forward facing air, and gas through stock.
spyder with kits adapter and with stock 2.jpg

[scottieb]

Bob Long Millennium with double trigger frame and Smart Parts Freak barrel. It's all stock except for the barrel and the detent.
spyder millennium with freak.jpg

Black full bodied Spyder with bolt pin mod, custom rear cocking Piranha bolt and RVA, ProLine .45 block with rubber grips, angled ASA, stainless line, expansion chamber, stainless VA, TASO LPC, metal detent cover, and Lapco Bigshot barrel.
spyder pnuematech.jpg

This is the oldest Spyder I've got. This one and I are like a broken recliner, we go waaaaay back. Choke screw Spyder, ProLine back block with RVA, raised sight rail, field strip screws, trigger job, brass shoe, ProLine .45 block, angled ASA, stainless line, brass fittings, "add on" expansion chamber, ported and polished internals, and hard chrome brass barrel (J + J?).
spyder old with old goodies.jpg

Dye Spyder. Single hole Compact, single Dye frame with Dye rubber grips, duckbill, stainless line, Dye gas through grip, Dye aluminum barrel, TASO sight rail, and the Dye barrel condom and tank cover.
Dye Spyder driver side.jpg

Smart Parts Spyder. Full body black Spyder with single frame from my oldest Spyder cut to accept Smart Parts VA, Smart Parts expansion chamber, stainless line, brass fittings, Smart Parts wood grips, duckbill, metal detent cover, RVA, and Smart Parts All American barrel.
spyder with smart parts bits.jpg

[scottieb]

Mostly TASO bits on this one: barrel, rear cocking bolt, sight rail, RVA, frame, rubber grips, angled drop forward, expansion chamber, and field strip screws - all TASO. It also has stainless line, a ported valve and front block, duckbill, and a cocking slot cover.
spyder taso mostly.jpg

Single hole Compact with AKA Mitey Max front block, custom Angel LED VA, Angel LED reg, macroline, shark drop forward, duckbill, Benchmark double trigger frame with APP panels, sissy stick, beaver tail with RVA, Omega sight rail, and Smart Parts Teardrop Progressive barrel.
spyder with angel va and reg, shark drop.jpg

Single hole black Compact with SE trigger frame, ring trigger, .45 block, TASO drop forward with on/off, macroline, WGP reg, Shocktech LPC, rear cocking bolt, PMI sight rail, and BOA express barrel.
spyder with ring trigger 2.JPG

Spyder one done up with AKA bits. AKAPP Mitey Max, AKAPP cocking slot cover, AKALMP rear cage, AKALMP bolt, Bob Long valve, RVA, Lapco VA, WGP reg, macroline, Dye Titanium Boomstick, Benchmark double trigger frame with rubber grips, and NW drop with on/off.
spyder one 1.jpg
spyder one 2.jpg

[scottieb]

CenterFlag Spyder. Hyperframe, reg, barrel adapter from Ninja kit, and drop forward. TASO LPC, RVA, PMI sight rail, AKAPP Lightning bolt, I forget the valve in this one, and stock '97 WGP barrel.
centerflag spyder driver side.jpg

Green Spyder Victor with E frame, Sideline Stabilizer, AKALKP Lightning bolt, TASO sight rail, and Smart Parts Freak barrel.
7935C977-10FF-4F07-B6D2-5E78F6133579.jpeg

All stock Spyder SE.
spyder se from mcb SS resize.jpg

The "scratch and dent special" or "the beater creation just for fun on the speedball course": single hole Compact, rear cocking bolt, rear cage, ported and polished internals, super short trigger job, ProLine .45 block, reversed angled drop, duckbill, stainless line, ProLine mini expansion chamber, stock Spyder LPC, and stock brass lined crown point barrel. Anti siphon tube in tank. I must have hit my head (hard) when I came up with this one but it is extremely fun on the field. It sits wonderfully, and can rip through paint.
5EF55437-AE81-4E96-840D-61EF73863D57.jpeg
05D1930F-55BF-4B74-8C86-C0F9E7DDE23C.jpeg

[scottieb]

Purple Spyder with Benchmark frame, AGD bike grip, and macroline, otherwise mostly stock.
spyder purple benchmark frame agd bike grip.jpg

Classic full body with larger feedneck, BOA Snakebite with wrinkle coat, Shocktech LPC, NW VA, Benchmark shorty expansion chamber, macroline, NW drop and on/off, NW cocking slot cover, NW sightrail, NPS/Proline beaver tail RVA, NPS Autorocker frame, Taso grips, Bob Long valve, polished and lightened stock bolt, and cracked detent cover mod.

spyder with autorocker frame and nw parts.jpg

Black E99, stock frame, unknown front block and LPC, Centerflag regulator, AKA valve, polished hammer, polished and lightened stock bolt, Freak bored AA back, AA front, and a Trinity metric to standard hose adapter. Future plans include a different drop and ASA, stainless hose, clamping feedneck, and rubber grips.

spyder e99 with cf reg.jpg

Spyder Shutter body with custom cuts. Mako frame, star drop from an M3 clone, stock gas through and reg, and OTP barrel. Plans are to source a red gas through or HPR and add a different drop and ASA, then a new bolt and some internal polishing.

spyder shutter cut mako frame with guard.jpg

[cave_hero]

Super Start Kits from SP. The crazy black splash one is 100% restored and I’m currently working on the camo one.



Eclipse deluxe spyder, mocked up and ready to go to Caustic for anodizing



Spyder with a neat little expansion and a Jacko barrel



I’ll add more pics when I get them ready.

[The Inflicted]

It's a Spyder, er spyder.
spyder.jpg

[scottieb]

This is a really clean one.

[Solmangrundy]

A Spyder TL I was given around the late 2000's when everybody treated these paintball guns like they were disposable.

Woodgrips and PMI spiral port barrel are nice. Eventually want to put a reg and nice on off on this. And see if I can't get Azodins Zero system to fit on here.

20201009_230121.jpg

[spikeball]

My E99 mech build with a revamped trigger frame. It has a secondary bottomline set up with a Fenix ASA and a WGP reg. Not sure which one I like better.

[sugarstump]

Very rare Hammer III Semi Auto!
DSCN5570.JPG DSCN5569.JPG

[ghilliesuit]

Wow. That is freaking awesome

[un2xs]

These were (to me) the most comfortable feeling paintball guns i have ever held/used. The one I was going to buy stopped working before the day was even complete. I ended up buying my ICD Puma instead. Still looking for one I can afford.

[Kyle G]

Dale, you are the man.