Protoyz Speedster MG Reversed VASA Mod
So this is a mod that I had in mind ever since I first disassembled this gun after I bought it.
IMG_20220410_164859_073.jpg
The Vertical adapter that Is usually angled forward easily fits on in reverse - If it weren't for its screw that is also angled.
IMG_20220410_164915_641.jpg
This caused me to ditch the Idea at the time, but while prepping the gun for another mod I thought about it again and figured I could easily dremel out the insides of the VASA without having to worry about ruining the seal between it and the body, since its an O-ring that sits on the outside.
So I started hacking away.
IMG_20220410_170809_713.jpg IMG_20220410_170743_000.jpg IMG_20220410_170700_001.jpg
Et Voila:
IMG_20220410_170602_941.jpg
It lines up beatifully with the grip and the 90° Fitting will sit beatifully between the trigger guard and regulator (once I shorten the macroline).
The new angle looks much sleeker and will suit the pump-setup better.
Now onto halfblocking it.
IMG_20220410_133932_490.jpg
IMG_20220410_164859_073.jpg
The Vertical adapter that Is usually angled forward easily fits on in reverse - If it weren't for its screw that is also angled.
IMG_20220410_164915_641.jpg
This caused me to ditch the Idea at the time, but while prepping the gun for another mod I thought about it again and figured I could easily dremel out the insides of the VASA without having to worry about ruining the seal between it and the body, since its an O-ring that sits on the outside.
So I started hacking away.
IMG_20220410_170809_713.jpg IMG_20220410_170743_000.jpg IMG_20220410_170700_001.jpg
Et Voila:
IMG_20220410_170602_941.jpg
It lines up beatifully with the grip and the 90° Fitting will sit beatifully between the trigger guard and regulator (once I shorten the macroline).
The new angle looks much sleeker and will suit the pump-setup better.
Now onto halfblocking it.
IMG_20220410_133932_490.jpg