I did something

[JeeperCreeper]

Well it's pretty straightforward on this trigger frame swap. I picked them both up on Ebay, and the Imagine was trash. I tried polishing the internals but it would need pretty much everything to be 100%. It seemed like it was cranked up and never maintained as it had deep gouges in the bolt and breech. I got it all smoothed out but now I'm just not sure it can handle full auto. It might make a good backup as a semi though. A quick cleanup and lube on the MR and it's good to go. I think I'm ready to try all of them out this Sunday.

[MrKittyCatMeowFace]

Gravity hopper on a espyder, The best

[DavidBoren]

The good ole switch-a-roo.

I don't even know what to do with all the E-grips I have swapped out for mech frames... I think I have 2 or 3 of them, and a rocking trigger frame.

I had plans for putting the rocker on a Mag rail to trip the On/Off, but then I bought a single trigger Y-frame for it instead. Silly me sold all my Automag stuff before I even put it together, though... I only have time and space enough for one farm, and Spyders are my $#!+, so the Mag had to go before it started to multiply (as they will do).

[glaman5266]

Why wouldn't it handle the full auto? As long as everything functions & moves smoothly I'd think it would be fine. If you're really concerned about it then maybe just start it off slow (8 BPS or so) and go up if you feel the need.

[JeeperCreeper]

The hopper is just for show I'm getting a new one soon or I'll just use my Eggy 3

Also the marker that can't handle full auto is the Imagine because the internals had some serious damage, so I put the mech trigger on there and the E trigger on the MR

[MrKittyCatMeowFace]

Why wouldn't it handle the full auto? As long as everything functions & moves smoothly I'd think it would be fine. If you're really concerned about it then maybe just start it off slow (8 BPS or so) and go up if you feel the need.

Idk i kinda understand what he's saying. Stbb are so simple. A couple orings and a cup seal. But ive had several rough ones that never would cycle no matter the seal I replaced.

[glaman5266]

Also the marker that can't handle full auto is the Imagine because the internals had some serious damage, so I put the mech trigger on there and the E trigger on the MR

Your original post made it sound like you hadn't tried it yet. Just asking.

Idk i kinda understand what he's saying. Stbb are so simple. A couple orings and a cup seal. But ive had several rough ones that never would cycle no matter the seal I replaced.

Yeah, I can see how that would happen. I guess I've had good luck with them. Bought a box o' Spyder Flash from Riot a while back, bought a ton of new screws, cut a clevis pin & smoothed out a pretty rough bolt. 13 BPS full auto on first test.

My JT Excellerator is another story though...

[Tarsun2]

send it and see what happens