Buddy went to his first game and they handed out basic markers to new players who attended. From what I can tell, its an old spyder victor (metallic light blue, with a rail on the back). It airs up fine but low velocity. I'm thinking warn main spring? any other suggestions or parts to check/replace?
Older Spyder Victor low velocity
Collapse
X
-
Main spring and the often very short barrels these came with are the two most common low velocity causes
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedback -
Issues that could cause this,
.#1 Using HPA Tank that is under 800psi output , Spyders run about 800 psi
.#2 Hammer Spring..
Rebuild , Replace all o-rings , lube well.. Hammer o-ring is 015- 50 durometerComment
-
-
No.
I've encountered many that would not shoot UNDER 300.
The springs are the same regardless of where you buy
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
Comment