Considering picking up a magfed gun and was curious about aiming with a drop stock while wearing a mask (Pro shields). I find it very difficult to aim with a straight traditional rifle stock but I am not sure if a drop stock would make a big enough difference. Any insight would be appreciated. thanks
Aiming with a drop stock.
Collapse
X
-
I believe a drop stock would be a good idea. I use a tippman tmc with a tank/ collapsible stock and it’s difficult to get behind it to aim. I installed a m16 grip with a red dot on top and its pretty much heads up to aim. You will probably need to experiment with a set up that works for you. Good luck. -
i might need to get a 2.26 raiser mount and use my dye i5s I’ve seen those are popular among airsoftI believe a drop stock would be a good idea. I use a tippman tmc with a tank/ collapsible stock and it’s difficult to get behind it to aim. I installed a m16 grip with a red dot on top and its pretty much heads up to aim. You will probably need to experiment with a set up that works for you. Good luck.👍 2Comment
-
I really like the spec ops T2W stocks, their a little hard to find these days, but provide excellent space for the mask to sit in without getting in the way. I also run an old tiberius scope mount riser, their heavy, but work really well at sighting in with a mask on.Comment
-
I can’t hit anything if I can’t get directly behind the marker to aim. I prefer drop stocks but a lot of magfed markers want a specific look.
Comment
-
Admittedly I do kinda what magfed to larp with an Ar but if it makes aiming too hard that would be frustrating . I too can’t hit anything unless my nose it pretty much against the back of the gun. I guess a compromise will have to be made somewhereComment
-
Comment