remove typhoon ram

[poisonpill]

What's the easiest way to remove a ram from a typhoon and replace the seals? I removed the barbs and the rear L but it's still attached to the gun.

Thanks.

[Jordan]

They're not rebuildable (AFAIK), but...

Remove the rear hose barb and front 90° fitting, the pump arm, and jam nut off the shaft. Take the cap off the front of the ram's housing - you should see another fitting/elbow with a hex head on it, use that to unthread the ram from the housing.

Throw the ram away, replace with another one. The replacement ram should be something with a 1/2" bore, 1" stroke. I think the nose is threaded for 3/8 coarse thread but I can't confirm that until I pull my Hurc apart.

Edit: nose is threaded for 7/16-20, standard for these rams.

[DocsMachine]

As mentioned in another thread here, the rams are off-the-shelf Humphries. If it's leaking, it's not rebuildable, and you'll need to find a Humphries dealer to order one. It's not a common paintball part.

Doc.

[poisonpill]

Ahh darn. Thanks anyway. These things are getting old sadly.