Superstocker stuck valve

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Trygve
    Bunker Buster
    • Jul 2020
    • 178

    #1

    Superstocker stuck valve

    Well I’m trying to remove the valve on my superstocker. Have the VASA off. Have the valve unscrewed and internals out. Now having trouble getting the green aluminum sleeve out the front and the other sleeve out the back of the lower tube.

    I’ve circled them in the photo.

    They move back and forth together but won’t seperate.

    tried hot water and freezing as well. Will try penetrating fluid next. Are these really just meant to slide apart? There’s nothing to grab on to anywhere.

    any tips for getting these apart?

    thanks

    You do not have permission to view this gallery.
    This gallery has 1 photos.
    Last edited by Trygve; Today, 12:44 PM.
  • shooter311
    Lumbering and loud
    • Sep 2020
    • 1193
    • Maine

    #2
    No pics.

    Comment


    • Trygve
      Trygve commented
      Editing a comment
      Fixed, I think. Thanks
  • Jordan
    I. Am. Canadian. 🇨🇦
    • Jul 2020
    • 3506
    • Southern Ontario, Canada

    #3
    Yes, they do pull apart. They're likely stuck together with gooey oring.

    I would put the valve back in, just to hold the coupler in place, and carefully push on the front sleeve with a screwdriver. Once you get it cracked free it should slide apart pretty easily.

    I've used a skinny flatblade screwdriver and small hammer in the past - set the blade of the screwdriver inside one of the threads and tap carefully. You can chase the threads after with a 1/8"-npt tap if necessary.

    Comment

    Working...