2k blazer leaking from hole in regulator

[Trygve]

Any blazer techs in here?

new to them myself. Its leaking from small hole in the bottom of the regulator, near the front of the marker. Any tips or diagnosis before i tear it apart?

thanks
Trygve

[Carp]

Any blazer techs in here?

new to them myself. Its leaking from small hole in the bottom of the regulator, near the front of the marker. Any tips or diagnosis before i tear it apart?

thanks
Trygve

May Velcor be with you and guide you! 😉

[Kit]

If the markers been sitting awhile, I would tear it apart and check the O-rings. Remove the LPR adjuster screw, use a nickel or good fitting washer for the LPR cap slot. Remove the flat disc and spring. You can point the marker down on the floor against a towel and air it up. The plunger should come flying out. Needs a -112 O-ring for plunger. If O-ring is soft or melted, I would do a complete reseal. There is a break down picture in the stickies.

[Trygve]

This is great info and gives me courage to continue. Thanks