Recently bought a first gen Tippmann SL 68, aired it up and it fired but I could hear a small leak coming from the rear. Disassembled it and replaced the two o-rings. Reassembled and had a leak down the barrel. Pushed the valve/valve seat back further and re installed the set screws, has no leaks but can hear air escaping when I open the breach, and occasionally fires multiple shots when pumping back. Thoughts?
-
SL 68, 68 special, Pro Am, Pro Lite, Factory F/A, Mini Lite, SL 68 II, 68 Carbine, Model 98, 98 Custom, VM 68, Z grip Automag, Phantom(s), Classic Automag, Air Star Nova, N3 Hellion, Emek, Metadyne Phoenix -
How does the cup seal look? Leak down the barrel is typically that. -
Sounds like a cup seal.
https://www.tippmannparts.com/SL2-26-SL-68-II-Gen-1-Valve-Cup-Seal-for-Gas-Powe-p/gp4643.htmComment
-
Cup seal looked good, going to try a full tank and see if the pressure may have been too low.Originally posted by packersrule729 View PostSL 68, 68 special, Pro Am, Pro Lite, Factory F/A, Mini Lite, SL 68 II, 68 Carbine, Model 98, 98 Custom, VM 68, Z grip Automag, Phantom(s), Classic Automag, Air Star Nova, N3 Hellion, Emek, Metadyne PhoenixComment
Comment