Phantom to Nelspot sears

[flyweightnate]

Back on MCB 2.0, I had a batch of sears that allowed a person to drop Phantom internals (power tube, hammer, bolt) into a 007 and work perfectly.

Is there still interest in these, given the increase in CCI part costs?

I can have more made, but no longer work with the laser directly, so I have to run big batches... like, 50, big. If at least 30 don't sell I'll get hosed.

Worth it? Who wants one (or more)? I try to keep the cost around $15 ea, in either 304 or AR400.

[Grendel]

I have a couple Nelson Clones that have less then stellar guts that would be well served by a conversion to Phantom Innards. I know you made these for 007s but if your kits get me most of the way there I can do to modifying to make it to the goal line. These markers are in solid shape just never had good internals and are not anti-kink.

[flyweightnate]

They'll do anything Nelson- compatible and breech drop, in my experience. Except Rangers with those tapered bolts.

[fullofpaint]

I have one from the last batch but could use a couple more for some projects.

[WORR13]

ill take at least 2

[rathbaster]

Is this still an active possibility?

[Brokeass_baller]

With only 8 "I'm in" votes, and his necessity for a run of 50, I'd say it probably fizzled out, unfortunately.