Got a couple PMI traccers that I’m working on and have a couple questions. 1. Does anyone make a straight asa to replace the angled version? 2. The current asa’s have what looks like copper crammed in the hole where the air inlet feeds to the valve. Can it be removed? Trying to get more consistent pressure.
-
-
Not sure about the straight ASA for traccer ... seen them for other nelson, might have to go the custom route.
For the copper/brass in the ASA transfer hole, that's a filter for CO2.
You can drill it out if you want, it shouldn't affect much other than airflow when autotriggering.Love my brass ... Love my SSR ... Hard choices ...
XEMON's phantom double sided feed
Keep your ATS going: Project rATS 2.0
My Feedback -
there's a straight dropout changer adapter for them but kinda hard to find. around 50 when they do pop up.
on my maverick i can use phantom valve bodies and vice versa, you should be able to do the same. just swap the internal valve assemblies, same thread. when i setup my phantom for hpa i use my maverick valve body and play back bottle.Comment
Comment