Maybe I’ve gotten a little carried away playing with lever setups and unicorns lately but I’ve finally found a keeper. It doesn’t load a ball when spinning…but I forgave that little grievance the first time I popped one in breech. Garg based breech maintenance is just so smooth and speedy, completely eliminating the time consuming screw removal necessary with a standard phantom mounted in a dukie kit. No gargoyles were harmed beyond a pem stud change. The Walz stock did require a little extra inletting as well as some holes drilled for mounting the ASA. But I asked Wally for his guidance and installed two 10-32 threaded brass inserts as per his recommendation. The setup is super smooth and the .682 lapco shoots straight as a pine. Yippee ki yay fellers
Comment