Jeepers single shot PGP build

[JeeperCreeper]

Deja vu. Ready for hot stuff.

[JeeperCreeper]

[JeeperCreeper]

Oh and back to the original build: I added brass plugs and a pin to my side tube. I originally used a 1/4 drill bit, and I decided it was time to get that back. Also finished a tiny bit of grinding I had to do to the feed hole. Now I need to polish it again.

[JeeperCreeper]

Ended up resoldering the main tube, and added the side tube for barrel retention. This one has a 12" top tube, making it quite a bit longer than the first one

[JeeperCreeper]

Got a bit of work left, but I hope I get it sorted out before tomorrow.

[Spider!]

Nice work! I had to catch up. You did a whole lot with a single PGP.

I'd say that all snowballed successfully.

[JeeperCreeper]

I already have plans for #3 and #4. Then I'm hoping to get into the larger models after that

[Chuck E Ducky]

Ahh can’t wait to get my palmers order with my speed demon and brass order to come in so I can get to work on mine. I popped the top tube off so far. Going to see what I can do with that Semi K frame internals kit NetSurferDude sent me.

[JeeperCreeper]

#2 is ready to go. I was requested to make a long rifle tip for it, made from some Palmers brass.

[JeeperCreeper]

#3 is almost ready for solder.

[JeeperCreeper]

And then there were 3.

[jeramiej]

These are great, and I like the variations on them. Well done.

[Chuck E Ducky]

I got to get going on mine… I keep procrastinating.

[JeepDVLZ45]

Yea you do!

[JeeperCreeper]

Well if you can't find the time , you can always send it my way

[Chuck E Ducky]

You are getting really good with that hot work!

[JeeperCreeper]

#3 polished up and ready for testing with the plastic K frame

[jeramiej]

Side load, like an old six shooter. It will be interesting hearing your preferences on the three.

[JeeperCreeper]

I prefer the one with the silver K frame. It's about 45* between the top and left. Suits my play style the best

[Chuck E Ducky]

Got to see the one you made for Packers and its really nice. The way you do the Freak inserts looks so clean and you got that hot work down to a science now. Can’t wait to see what you come up with. I can wait to see how those brass bits I got from Jim this weekend look on the Speed demon bolt. It’s going to be perfect for a single shot pistol.

[JeeperCreeper]

#4 was a collab with AnarchicArctic for his Freak XL single shot build

#5 is torched apart and ready to be cut up.

[JeeperCreeper]

Just gonna leave this here for Velcor

[BrickHaus]

While u are at it......

[JeeperCreeper]

Message me

[Riot]

You selling and/or trading these bad boys?

[jeramiej]

Exactly. We need details.

[JeeperCreeper]

So all the ones here have already gone to their homes. But if you have a complete PGP, we can talk