Is there anything I should know before I hypothetically start one of these? Any non obvious issues that will arise? It seems like the most difficult task would be mounting the frame and bodies (nothing a little 3D printing couldn't solve).
-
-
Fitting all the hoses into the confines of the adapter and frame is a pain, and attempting to fire both barrels simultaneously is an exercise in frustration.
You'll need QEVs and dual tail oring bolts.
Good luck. -
Toestr - I had assumed you were going mech. If you plan to stay electro, you don't necessarily need DTO bolts, but that opens up another can of worms.
Have fun! 🙂Comment
-
I recommend using 2 bolt out back bodies to make maintenance easierComment
-
Good solenoids can still be found. Some people are making new armature for them.
Anodizing is a good primer.Comment
-
how's this build going so far??Feedback: https://www.mcarterbrown.com/forum/b...ova-s-feedback
WTB: ICD stuff, single trigger electro frames, Gloss lime and purple parts, smoke hoppersComment
-
anything ever happen with this?Comment
Comment