Just wondering if anything other than the tech t l6 bolt(which is impossible to find) will fit in the gog enmey version 2? I know there were rumors of the firebolt and the l7 bolt working, but I have also seen people say they do not work. Any ideas guys? Thanks!
-
-
Should be the same as a Mechanical Ion, so any bolt with dual tail o-rings should work. Just search "Smart Parts Ion bolt" on ebay, you will see some options to choose from. -
thanks bud. I ended up finding a shocktech supafly ion bolt. Hopefully it works okay and is a little bit of an upgrade!Originally posted by JeeperCreeper View Post
Comment
-
I've used those in my mech Ion conversions before, they work pretty well. I don't thing you need a super light bolt like the L6, because even the stock bolt will cycle at least 17 bps in an electro setup. Typically I went with the super light bolts for faster cycling, and maybe an ever so slight increase in efficiency, but nothing to write home about. Good luck with your project
-
-
Thanks man! Hey while I got you here, I am planning on doing an on off asa as well. I figured maybe while I do that I will change the regulator too. Local shop told me the only thing they got are 85$ dye regulators that will work with it. Besides spending that, are there any other options? I know the stock reg is good but figured since I am switching to macro line I could do that too.Comment
-
Any efficiency increases will be more than undone if the upgraded bolt doesn't has dual tail orings.
Any reg that has a minimum output of zero should work, however the stock reg has a preset blowoff valve that will prevent damage to the trigger valve. For that reason I would stick with the stock reg.Comment
-
I had looked at getting a cool bolt, but a $50-$100 bolt in a $130 marker seemed more than I needed. If it was a super increase in efficiency that’s one thing. I left the factory reg as well. I added an on/off as the only thing I felt I really needed.
I did have the feedneck nub break off at Decay of Nations years ago, in the chrono line no less. So that was terrible. Had to shoot an A5 all weekend. First time, last time, terrible trigger. Anyway, I milled off the broken part and threaded the plastic body for a threaded feedneck which worked great for many outings. The plastic body eventually had 3 cracks at the neck so the threaded in neck didn’t hold. I put another ENMEy in an Ion body and drilled/tapped the can for a threaded feedneck. That’s pretty great imo. Love this simple marker from that stupid company.Comment
-
Yeah I wouldn't say a reg is necessary either, unless you're having issues with the one you have. Again, a better reg is something necessary on a high rate of fire build, but not so much with a mech. I do run a Dye Hyper 2 on one of my mech creations, couldn't tell you any difference over a stock reg. I just used it because of the fitting location, and it runs in The proper psi range.
I definitely recommend the on/off for any marker that uses a tank though.
After all this, we're gonna need a shooting video when you're done 😉Comment
-
The only bolts that I ever noticed a difference in shooting for the enmey was the orange unicorn bolt with upgrade kit and the tfgpb(or was it Yoda?) closed bolt kit. The unicorn basically turned it into a G3 with a tail to close off the air flow and the closed bolt kit made it feel more like a cocker. You lose your 'low blow' bolt feature with both though so you may have breaks without a force feed or good agitating hopper.Comment
-
I got this gun cheap. Cleaned and changed out orings. Shot fine but didn’t like how much trigger travel there was so I got an orange ultra trigger off eBay for 15$. I wanted to make the body orange but didn’t know how painting would be, so I found out gog has an orange body available. They send it to me, and to be honest, it’s very very light orange, like yellow. lol. So I took the original red body to work yesterday and sandblasted very lightly. Gonna attempt a paint job with rustoleum primer and orange for color. If the supafly bolt doesn’t offer anything noticeable I’ll probably put the original bolt back in and save the supafly for an ion project. I was only thinking of a new reg since I want to change to macroline with an On off asa. But yeah I’ll def stay with the stock simply for that de pressure feature. Haven’t changed the barrel yet.Comment
-
Just unscrew the hardline from the reg and replace with a macro fitting. That’s all I did with mine.Comment
-
Little bit of a thread jack here but is there any difference in the V1 and V2 enmeys, they changed some things but is the V2 really any better I know they had the HE valveComment
Comment