Ion solenoids

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Iseeo_0you
    Bunker Buster
    • Mar 2026
    • 133
    • The Land Of Worr

    #1

    Ion solenoids

    Solenoids are not my area of expertise, so I was wondering if anyone on here may have info on if there are any retrofits for a different model of solenoid anyone has adapted to use on the ion marker. I'm currently designing an updated main board for the ION platform via a request and would really like to figure out how to provide people with new solenoids vs retrofitting old ones onto new boards.

    I know the solenoids are NO 3 way valves, but i'm having trouble finding a suitable substitution with off the shelf components. I really don't want to have and try to design my own πŸ˜…. Any information would be highly appreciated on any mods you may have heard of to use a different solenoid in these markers.
  • Roger7pball
    MCB Member
    • Jul 2020
    • 571
    • Arizona Bay

    #2
    I don’t have any experience with Ions but always thought some of these small 3 way solenoids from AirSoldier deserved a home somewhere.

    https://airsoldier.com/product/smc-s...-pm3-solenoid/

    Comment


    • Iseeo_0you
      Iseeo_0you commented
      Editing a comment
      Nice, thanks for the info.will look into them πŸ‘

    • Jordan
      Jordan commented
      Editing a comment
      Their max input is ~100psi so not suitable for Ions. They do work great for electropneumag conversions though.
  • Jordan
    I. Am. Canadian. πŸ‡¨πŸ‡¦
    • Jul 2020
    • 3504
    • Southern Ontario, Canada

    #3
    Mac33 solenoids work - i think the Lucky board used them but required a specific rear fitting.

    Comment


    • Iseeo_0you
      Iseeo_0you commented
      Editing a comment
      Nice, thanks. That gives me a bit more confidence in moving forward with this. The board is done but the solenoids are a major pain point. I can always revise the boards components to work with a new solenoid as long as it works.
  • Pumpytrilly1
    Certified Post Whore
    • Jul 2020
    • 566

    #4
    I've already thought about asking if someone could make a universal board and a separate PCB board that the stock solenoid could be desolder and soldered to.

    I assume it would be easier though just to source some mac33/humpry noids like lucky did. As I think trico? Stopped making ion noids
    Feedback

    Comment

    Working...