FloryPB board for a4 fly.

[Fart]

Has anyone got one, how are they. How do they compare to the predator board from TAG or the enoch board or other options out there I'm unaware of.

[Sbrannam]

Wondering the same thing, looking at getting a couple for different angels

[Brokeass_baller]

Curious as well. My PM board is pretty nice, but I've been wondering about these.

[Fart]

Well I guess I'll be the guinea pig then. My stock board works fine and the screen is perfect but I'm sick of the battery.

[Roger7pball]

I have heard good things about the Flory board, only downside were some small fitment issues but that may have been an isolated issue. From what I’ve heard the seller will take care of you - has made specific boards for people from requests (Angel LCD board with enough oomph to power a Rainmaker solenoid).

[Trbo323]

Hang on, I know someone who has one I'll get him in here

Paging Ghille-Man

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Fart]

Well I already got it. Insanely fast shipping. Anyways, install was a breeze. Getting the old 4.6v battery out was the hardest part and even then that's not hard. It comes with a switch that just replaces the factory switch but it has a 9v harness attached to it. A nice touch IMO. The buttons all align properly and aren't mushy. The led lines up where it should. And the microswitch is nice. I haven't really messed with the programming too much. It came default on 10bps ramping, I'll change it to semi later. My ribbon eyes need replacing and there's a spot for stock eyes or dm style eyes so I'm just going to order some from TAG. Supposedly there board can be adjusted to 40 bps. Looks like the rotor just found a new host.

[Brokeass_baller]

Any chance there's compatibility with Sensi? Or just eyes? I guess these days at 10bps out doesn't really matter.

[Fart]

I don't know, about sensi, you would have to ask. But yeah I think if you weren't trying to shoot higher than 20 or so and had a rotor you'd be good to go

[Roger7pball]

Glad you got the board already.

I’m sure you guys are aware but running blind can still lead to chop city. The last few balls aren’t being pushed into the chamber, so if you’re streaming a rope at the end of the hopper it can turn gooey.

[Fart]

Glad you got the board already.

I’m sure you guys are aware but running blind can still lead to chop city. The last few balls aren’t being pushed into the chamber, so if you’re streaming a rope at the end of the hopper it can turn gooey.

Yeah I know, I already confirmed with flory that the TAG dm eyes will work and ordered a set from TAG. Hopefully they'll get here in time for Sunday. If not though it'll still be sitting at 10 bps regardless. Still the rotor or halo will be on it.

[s5lin]

Fart,

I'm looking to hear your feedback on how this conversion works out for you

Trying to get my old G7 fly going with a flory board so I am curious to hear how it goes with the DM style eyes vs the ribbons on later WDP guns. Do you know if you have to drill out the holes more for the DM emitter and receiver eyes on the A4 body?