Angel's LPR ... Adjustment/replacement/alternatives?

[XEMON]

Hello y'all,

My angel 's LPR is not regulating and I'm not quite sure how to get it going ...
The seal look in good shape and I have the stock spring stack in there.

SO what do you use for spring stack? (Are the the same Belleville washers as in the HPR?)
Any replacement available?
Any alternative or external one available?

Teatch me about angel LPR 😁

Thanks,
X

[superman]

aka used to make a full replacement. looks like they don't have any on the website though.

[Siress]

what model?

[Hellion360]

I actually have an aftermarket AKA one in the mail from a package of stuff I bought. I was after a barrel and valve in the package.
Not intending to use it, since I have an era mod on mine. (external LPR)

Send me a message if you are interested in it and I'll get you pics. Should arrive tomorrow I think.

[XEMON]

It's for an LED.

The 2 half of the lpr were not screwed in all the way and completely seized ... The lpr snapped in half when I tried to take it apart.

I found a whole front end at a reasonable price, there is a few things wired from the manual description. I found a whole front end, hopefully I can get that one working.


Hellion360
do you have a pic of the external LPR mod?
Thanks for the hook up, I'll let you know if the one I got doest workout.

[Hellion360]

https://www.pbnation.com/showthread.php?t=2357588 I can take pics of mine next time it is out, but this writeup has info.

[XEMON]

Thanks, if the one I bought doesn't fit/work, I may have to make one ...

[superman]

The aka lpr will not work with the led. They were too short and bled through the vent hole. I originally bought mine for a led project. at least unless Jared revised them.

the stock lprs are not intended to be user serviceable. I want to say they peen the threads so they will not come apart. They wanted people to buy a replacement. At least I know it was that way on the lcd and later lprs.

[XEMON]

Dam ...
Thanks for the info 👍

[XEMON]

The replacement LPR fits like a glove, and works perfect 🥳
but i get occasional ram stick, i think its the seal on the back of the ram ... I need to see if i cn adjust it or replace it ...

[Brokeass_baller]

*Belleville washers*

Just correcting you for ease of searching.