have a led and no charger this is set up to charge thru the intellie feed. best solution? all comments welcome thanks
-
-
if the charge controller and battery are good, its just a matter of feeding it the right voltage.
Do you have an adjustable power supply?Love my brass ... Love my SSR ... Hard choices ...
XEMON's phantom double sided feed
Keep your ATS going: Project rATS 2.0
My Feedback -
so i have a "lcd" charger but it has a plug that goes into the grip. the voltage should be the same, (im pretty sure) i have to figure out how to adapt to the intelli feed. battery is goodComment
-
I made a LED charger with an Amazon charging station and a intellifeed cable. I’ve been making cables and plugs for decade so don’t try this at home unless you know how to solder. It possible. I’ll look for a picture.Comment
-
Whoa, I actually found a picture of it. Here you go. I’ll help you out, or ship it to me and I’ll wire it no fee.Comment
-
It worked flawlessly.Comment
-
I’m not sure about the itellifeed pass through wiring you mentioned. Check it with meter/probes.
It should be the same Except you plug into the top rail instead of the back, try both, the smart charger will tell you when it sees a battery.
Comment
Comment