Right Feed Dye Matrix?

[iamthelazerviking]

I follow a facebük page called Mike's Paintball Magazines where he uploads scans of each page from tons of different magazines. I saw this which I didn't know existed.

imagepost com

[dano_____]

There was a breach that aardvark made. It is really rare from my understanding. I think tarantula had warp feed ones too.

[iamthelazerviking]

Makes sense. Kind of what I figured after looking at more DM3 pictures.

[Macdave06]

I don't remember who made it but there was the "roto breach" which you could rotate wherever and lock it down. A guy on brimstone smoke ran his as a right feed too.

Sent from my SM-G960U1 using Tapatalk

[Ecapnation]

Ardvark made adjustable ones... But at gen e they had blind left and right breeches

[Alexndl]

I have one of those, its a 2 piece breech and the ring part have a flat spot on it that match 3 angle on the breech. You can do LF, RF or top feed. Also if you milled the wing on the body you could do Warp feed too.



Bought my gen e matrix with a Qloader on it

[iamthelazerviking]

Do you know who made it? Is it the Aardvark one that was mentioned?

[Alexndl]

I was told this one was made by Tarantula

https://www.mcarterbrown.com/forum/paintball-news-aa/ask-the-experts/43548-dm3-adjustable-breech-value#post43548

But Aardvark have made some too from what I understand

Ģot it already installed on a GenE I bought

[drewkroeker]

That is so cool! For a while I was shooting a DM3 and I jb-welded a 10-round springfeed to the breech and rotated it 90 degrees. It was super light and pointed very accurately for me. I also have the parts for an invert halo too that I want to configure into a "warpfeed" but I currently lack the fabrication skills.

[Trbo323]

Man, why does nobody do this stuff today? I'm definitely a center feed guy but just seeing this kind of stuff I think is cool

Warp right emek

Sent from my Moto Z (2) using Tapatalk

[Ecapnation]

Because nobody really wants it or is willing to pay for the machine time or engineering to make it.

[drewkroeker]

https://paintballdna.com/product/mg100adapter/ one of those and you're pretty much there

[iamthelazerviking]

Yeeah a right feed single trigger Matrix would be so rad

[MrKittyCatMeowFace]

Powerfeed angel lcd or ir3 with a dye single trigger frame. That would be so cool!

[Alexndl]

Yeeah a right feed single trigger Matrix would be so rad

Yeah that would be soo cool... wait I think I may have something

Current work in progress for next summer, waiting for AKA LPR and some tune up, might change the VASA since the front lower corner of the body are exposed and pointy

[Alexndl]

I would need to change the threaded feedneck to fit an elbow on it, so not with this feedneck but could fit something one day

[iamthelazerviking]

Ah I see, I see. The hopper would just be straight off the side like it is.

[Shan1Fat]

Always wanted a single trigger DM3 back in the day. What a beauty.

[gabe]

Damn dude that Gen-E is SICKKKKKK. The toxic frame make it really look like it's supposed to. I love those old sleeper electros. Now if you could just get a ramping board for it you would blow some people's minds.

[Alexndl]

Its a Gun20 LED board so it should rip
Will post picture when it will be finished with all the small detail install, but yeah I like the sleeper compact electro look

[lew]

I have three Matrices, and I'd love for one of them to be a right feed. I actually like my RF Shockers better than the vertical feeds.

[iamthelazerviking]

Resurrection of a thread. Had to share this old pic of a Trauma player.

[Jonnydread]

This thread reminded me that the PGI Mayhem came stock with a rotating breech.