Any interest in a new Morlock Board?

[Curly2k3]

I'd assume you prefer that we do not order currently then?

[curt]

Just because they're not in stock hasn't stopped people from ordering them! Seems like every time I ship out an armload I get another half-dozen orders, in spite of me saying I can't the parts!

I am probably tapped out for at least 6 months, believe me I wish I wasn't. I can (probably) fill existing orders but that's going to be it unless you can find me these (normally common and cheap as dirt) parts:

https://www.mouser.com/ProductDetail/579-MCP73831T-2ACIOT

https://www.mouser.com/ProductDetail/78-SI1539CDL-T1-BE3

https://www.mouser.com/ProductDetail/556-ATSAMD21E18A-AU

https://www.mouser.com/ProductDetail/Diodes-Incorporated/AP7370-33WW-7?qs=%252B6g0mu59x7LthBU4%252B8t%252BZQ%3D%3D

It's a wacky world out there right now.

[Jordan]

I did this on purpose realizing it would not be ideal for everyone. I think I might have made the wrong call, and I'll make "remembering the last fire mode" the default setting in the software. Which, by the way, you can reflash any mk3 to with just a PC and an android charging cable, if you want.

It's probably better this way - full-auto can't be reset with the trigger, so the option of just cycling the board off and back on is good.

Unfortunately I don't have a PC of any kind at this point in time, but when I do get one I'll definitely be playing around with the settings.

If you're still up for shipping to Canada I'd like to grab another kit when they're in stock.... I'm loving the one I put in my ebolt Tippmann.

[curt]

I am right now about two weeks out for backorders, I have another 20 or so to make and then I'm caught up, but I only have parts for another 30 after that and then might need to shut down for a year because the chip shortage is actually that bad.

[curt]

I did this on purpose realizing it would not be ideal for everyone. I think I might have made the wrong call, and I'll make "remembering the last fire mode" the default setting in the software. Which, by the way, you can reflash any mk3 to with just a PC and an android charging cable, if you want.

[Roger7pball]

You can change the “Default Fire Mode” with the computer program.

[Jordan]

curt - the board defaults to semi when turned off, ie: battery pulled.

Any way to change that? I think I remember you saying something but I can't find it.

[EvilCreature]

So glad this happened... then I saw the back order. Should I wait until mid September to order, when things are back in stock, or is this a limited-run type situation and I should get a "spot in line" for boards?

[scottieb]

I think I may need to pick up one of these for the EM1.

[Euphie]

I am sold I certainly want to buy a few more. The interface is really nice and IMO every marker is better with an Angel frame so the OLED is just a great touch.

[Altec]

Nice! I ordered 3. Just waiting now. Curt was nice enough to send a email explaining the delays. Really appreciate that. It’ll be great to truly modernize my Racegun. Maybe build a EP Mag too.

[Roger7pball]

Got the old Shoebox running.

[Roger7pball]

[superman]

One thing I don't know if it was mentioned, there is an on-board voltage booster so the Morlock should run any solenoid from the on-board LiPo, although I don't have an 18v e-mag monster to test with to be sure. The booster is software-programmable in 0.2v steps from 4v -> 20v
-Curt

Sent you a message on FB, maybe i can help.

[JCC]

Mine just came in and now trying to get it installed in my old Droid. Doing it cleanly is going to be a challenge, but getting this gun up and running with current modes has been a goal for awhile.