Any interest in SI-style pump bolts?

[DocsMachine]

I just finished up a parts-box Nelson for a customer (only a little bit late ) which did not include any pump bolts in the supplied parts.



I made up a pair based on the Line SI Bushmaster bolts, since it had a Bushmaster pump, and they worked nicely.



I've been needing a couple of the Bushy-style bolts for some other projects as well, and can recall one or two requests for them over the years.

I'm wondering if it'd be worthwhile to write up a program for my shiny new CNC lathe, and whip up a few dozen.

This is NOT a preorder, but if there's enough demand for at least 10-15 pairs, I'll order more material and run a batch. If so, post here!

Doc.

[evilfishsticks]

I would definitely be down for a pair or two.

[Walker]

I would take a couple pairs....

[Memornix]

You currently have my bushmaster and I believe it needs some so, yes

[DocsMachine]

That's yours in the picture.

Doc.

[capitalpaintball]

I would be in for 2 sets.

[DocsMachine]

Material ordered.

Doc.

[El Gringo]

Hey Doc!
I'll take 3 sets if any available.
thanks

[Grendel]

Yup, definitely could use a couple sets.

[DocsMachine]

A mere six months later, they're done!



Pretty much identical to the original SI Bushmaster bolts, except, of course, for the "SI" logo. Listed in the Dealer's section for those interested.

Doc.