Found another box of Old Angel threaded Barrels.. FML!

[woouulf]

Not a sales thread. Just kind of over whelmed thinking about having to list them all..

[scottieb]

Yee haw!

[GanonsGrin]

Wasn’t there somebody making threaded adaptors for these that converted them to cocker at one point? If so, it would make these useable to some degree

[flyweightnate]

Sanchez had a bunch on eBay

[scottieb]

Autocockerparts.com

They used to be had for $20. The one I have sees loads of use.

[woouulf]

Wasn’t there somebody making threaded adaptors for these that converted them to cocker at one point? If so, it would make these useable to some degree

Lapco made them and then another company made just a ring .. But there are enough LED, LCDs out there ..I have about 300 ..685 Old Angel barrel to .spyder ones..

[XEMON]

Can the back be trimmed down to cocker length?

[Brokeass_baller]

So I lied. Angel shank OD is actually smaller than Autococker. I don't know why on earth I remember it being the other way.

Autococker: .863 (spec is likely .865)
Angel: .824 (spec is probably .825)

I used a Sconi freak XL back for Autococker measurements, and a Dye Boomstick for Angel measurements.

[Brokeass_baller]

How the hell to image tags work? Anyway, here's a link. AC on the left, Angel on the right. Angel has noticably coarser threads. I think the threads are the same on Raptors and Rainmakers? I'm not positive, but I think I've heard that before. Shank is too long though.

https://imgur.com/a/AG7209F

[XEMON]

Thanks for the measurements and picture 👍
Ps: I'm not sure you can post pictures in the comments...