Autococker Flatline

[automeister]

Does anyone make flatlines for autococker these days? It is probably a long shot, pun intended, but I figured its worth asking

[scottieb]

None that I've heard or seen. There's more to it than just adding a barrel though.

[Trbo323]

Do you specifically want the flatline? It's easy to put a apex on a barrel

Sent from my motorola edge 5G UW (2021) using Tapatalk

[iamthelazerviking]

I want a freak bored flatline

[OpusX]

[confused trying to do math meme]

[Cdn_Cuda]

Flatline cockers had a special block on the breach, so was more than just adding a flatline barrel to them. Likely this is because you wouldn’t be able to screw a flatline barrel into a standard cocker. Now could someone make an adaptor/extended breach for a cocker to run a flatline? Very likely! Talk to the 3D printing gurus.

[Chappy]

The problem with an adapter is the ball has time to accelerate before the ramp, which causes mucho breaks. That’s why the block exists instead of a simple adapter, unfortunately

[Trbo323]

I want to freak bored flatline

Ummm, the flatline is curved, freaks are straight. I don't see this ending well

Sent from my motorola edge 5G UW (2021) using Tapatalk

[iamthelazerviking]

I know 🤣🤣 a long standing inside joke with myself

[Toestr]

Ok, but what about FSR through a Flatline?

[Ecapnation]

Get an apex barrel basically does the same thing

[automeister]

I prefer the flatline because it has historic and nostalgic value to me

[Carp]

Here is the best I could find. A pretty cold lead...

https://www.mcarterbrown.com/forum/b...latline-cocker

[MrBarraclough]

automeister, they don't crop up often, but when they do I have seen price tags northwards of $1700. A buddy of mine has one but I doubt he'd ever sell it.

[automeister]

Thanks for the lead, I messaged him. We will see

[FredMnkyDad10]

I have seen couple of them come up on ebay. One that was dust, used. Another gloss that looked mint, looked like it was not used.

If I remember correctly, I did not know this before, there are two versions of this. One that was made by wgp as a flatline from the start.

The other they took some some bodies, milled and made a front block conversion to flatline. I have one of these.

DocsMachine would know more. He was the one that told me about the ones that were machined. And I took mine off and sure enough mine is machined. They did not ano the body after it was machine.

[Jonnydread]

I had one a number of years ago. It dripped with OG goodness, but it did NOT like the tiny GI paint of the contemporary era. The only paint I got to shoot remotely okay out of it was some old Nelson Anarchy that had swelled up in the summer humidity. You need large and/or hard paint.

[automeister]

That is an excellent point. I wonder if there is any solution to that. Thank you for bringing that up

[Ecapnation]

There are technically three versions.

2k full size right feeds and 2k mini vertical feeds.

The third type is/was you can send your cocker in for a conversion.

I have seen couple of them come up on ebay. One that was dust, used. Another gloss that looked mint, looked like it was not used.

If I remember correctly, I did not know this before, there are two versions of this. One that was made by wgp as a flatline from the start.

The other they took some some bodies, milled and made a front block conversion to flatline. I have one of these.

DocsMachine would know more. He was the one that told me about the ones that were machined. And I took mine off and sure enough mine is machined. They did not ano the body after it was machine.