Does anyone make a low profile metal elbow? I think there would be a market for this. I have one of Sconi's leaning elbows but I feel a straight one that is as low profile as reasonably possible would be great. Perhaps we can get enough of us together to convince someone to produce something.
-
Last edited by automeister; 09-10-2024, 10:25 AM. -
I'm with you, Sconi's lean elbow rubs me the wrong way. I couldn't get used to it.
I would definitely buy the exact same product, just not leaning.
If you have a RF and patience you can get the Mozak offset vert mod done to a RF cocker. I can't recommend this strongly enough for a RF cocker that you really like. It gets the hopper low and you can still sight right down the top.Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedback -
Palmers used to make one, but if I remember right, it wasn't low profileComment
-
The lowest profile elbow I think iv ever used is a basic 90* cpvc plumbing elbow, but I lived with my dad as a teen and he was a plumber so i had unlimited access to things like thatComment
-
Mozak feed mod would be the best and lower profile option available💀Team Ragnastock💀Comment
-
I believe I have a mozak in my collection but I was thinking for markers folks didn't want to modify or for markers he doesn't do the mod on.Comment
-
I would love low profile elbows. Can I get them in brass?Last edited by JeeperCreeper; 09-15-2024, 07:06 AM.Comment
-
It seems that some vendors are responsive to MCBers and it may be possible that someone out there would make these if a bunch of us showed interest. Perhaps Sconi would? I think these would sell relatively well. I imagine Sconi has a lot of the necessary CAD information to adjust his from tilted to straight.Comment
-
I love the Sconi leans...but only on certain markers. On my mag it is absolutely perfect, and on my cocker it feels great.
On my shoebox shocker....not so much. That gun is just too bulky and unwieldy, and the lean angle of the Sconi just makes it even more awkward to use.
If someone does a run of low profile elbows with no lean I'd definitely want at least one.Comment
-
Thanks for your support, get your friends to chime in hahaComment
-
Is sconi on MCB?Comment
-
Not since Aug 2022 here is his site also sells on ebay
https://mastersconi.com/
-
-
I have thought about cutting one of modifying one of Sconi's. That may be the best alternative right nowComment
-
I can see a Karen getting Higley upset at some of those barrel covers 😂Comment
-
Heres a welded aluminum unit I made in the shop almost 15 years ago. held on with set screws
i was actually copying a design that i had bought on ebay but those elbows were taller
i could buy some 1" pipe, fab a jig and make
more.
the set screw style would be super easy but itd be real nice to make both ends clamp like the sconi.
i have a spare sconi ive been thinking about chopping into a 45° tooAttached FilesComment
-
Comment