Smart Parts Impulse

[automeister]

Could use some input from you guys. Can I run an original generation impulse with a more modern reg like a CP or AKA in lieu of the big old school max flo? Some advice would be appreciated

[Sdawg]

Yes, if you have a vertical adapter for the reg. The Impulse operates at around 180psi.

[Ecapnation]

Yes... For the most part regs are regs are regs.

If they put out the same pressure required it will work.

[Brandon]

I believe the Maxflow had a blow off valve to keep the reg from ever over pressurizing so it wouldn't ever damage the solenoid, whatever reg you choose to use make sure you set it with in the appropriate pressure range.

[automeister]

This is helpful. I rarely see an imp without a max flow so I was not sure if there was some reason for this that I was missing