Aluminum Taso vindicator grip and pump handle

[automeister]

I want a pump handle and grip in aluminum that will fit a Taso Vindicator. Were these ever made? Any suggestions?

[Magageddon]

If your talking about an over the barrel pump handle, then yeah that shouldn't be hard to source one. I'm pretty sure I actually have one in the parts bin

The easiest way to tell if it would work would be to measure your barrels OD and that would give people an idea what would/wouldn't work

[automeister]

I can do that! Thanks

[Grendel]

I believe I have a TASO pump handle that has a LAPCO sticker on the pump arm (someone tried to play it off as a LAPCO to me in a bulk buy years ago not realizing I collect old school LAPCO). I'm putting together builder boxes today I'll take some pictures for you.

[automeister]

That would be great, thank you!

[Cal440]

Nothing better than a builders box. Will be watching for these to drop

[Ecapnation]

The vindicator having a delrin pump was technically higher end and offered as an upgrade from the Spartan.

As for the grip of what you just bought any AR-15 grip should fit including phantoms so if you want to switch to a 45 it wouldn't be necessarily that hard.

[automeister]

I did not know that. good information

[Grendel]

I have not come across the Aluminum Pump handle I think is TASO yet but here is a Delrin pump handled, mentioned by Ecapnation used on most higher end Nelson Clones [Wintech, LAPCO, TASO and others] Pretty sure they were sourced from Wintech but not positive. This pump handle is set up for two pump arms for Bore Drop nelson clones and does not have the pump spring lip inside but they are easy to add if desired.

am pretty sure I have not sold the aluminum pump handle with 2 pump arms (Bore Drop) just need to find in my boxes of stuff in the shop.



From Vintage Rex a TASO Centurion with the Delrin pump:

[Ecapnation]

@ anyone who is interested...

He means this style pump.

[automeister]

A purple handle like the one pictured would be great!