[MOTM]September: Autococker Snipers/Pump

[Meleager7]

With great encouragement I present you my 2k something RF Sniper, simple and accurate, has the ID economy pump kit, an acparts.com slider, and a AKA lightning bolt.

I don't typically mess with springs too much, I kind of just test until something works, borrowed a main spring from Jordan and this gun ended up about 200psi out of the CP reg , which was a neat outcome !

[Ecapnation]

It technically counts because the entire lower tube , internal set is Trilogy.

Brass bodied, double barrel stock class sniper.

The ECAP Romulus (my friend owns its twin Remus)

[evilfishsticks]

My spare parts build that got out of hand.

[JeepDVLZ45]

Niche Celtic. (I love the bolt/back block on these)
CCM internals
Sanchez Stick Feed
CCM Drop and On/Off

Boondock Saints ano by ARC -
Saints Prayer on grip
“Aequitas” on the passenger side.

not 100% done yet. I have a .45ACP shell casing that will become the detent cover, I need a gold/brass trigger shoe, the Sanchez jewels applied, and a different beaver tail.

after banging my head against the wall for far too long trying to figure out screw sizes, I employed Hellion360 to assemble this for me - he’s a garsh-darn, level 10 paintball “warrior poet”!!

had a beautiful pump stroke

[JeeperCreeper]

You had a really tough choice this month, didn't you? The V is equally as gorgeous 😍

[JeepDVLZ45]

I really did!

But I’ll show everyone my V next month for the free-for-all

[NONOBLITUS]

I was curious as to what you would put up.

[OpusX]

Sleeper Retro 12g Sniper

• 99 body
• prek 2k wgp factory pump kit
• stock internals w/ 3-oring bolt
• wgp pot metal frame
• VL grips
• AC Parts 10rnd stick feed
• Mozak offset right feed
• Nummech clamping feedneck
• Doc Freak XL bull barrel
• Marksmann P Stock
• Ratt Attck 12g changer
• Bob Long Torpedo reg
• Kapp back block

[scottieb]

So very nice!

[Kit]

[Carp]

Hellion360 I'm pretty sure Kit made it himself. I know he made the feedgate. 😉

[Hellion360]

Looks terrific Kit nice work

[Kit]

Body is bored for 11/16 valve, feed neck is fish mouthed for the feedtube, and front is asa threaded for a Palmers male stabilizer.

[Lobo Fuerte 2.0]

[BLachance75]

Pre2k body laser engraved my a friend
Mozak frame
ICD feed
ACP pump kit
CCM lower tube kit
CCM reg
CCM ASA and mini drop

Gets 30+ shots on a 12 gram

[ChuckLove]

Inception Mini FLE Sniper

• Mozak 45 Swing Frame
• CCM Pump Kit with EZ Handle
• Nova Balanced Valve
• Angry Antle Jenni Kraig Delrin Hammer
• Inception Trident Bolt, v3 Regulator, Feedneck, Detent & Cocking Rod
• PE POPS on/off Rail

It was recently used to help PK Black take 1st place at the OSG King of The Mounds 5Man Pump Tournament.

[F1FX]

Had a hard time deciding which one to post so posting my newly updated micro cocker pump. Started this pump build 21+ years ago. Just added this folding stock I found on MCB to it.

PTP micro cocker
WWA pump kit
Carter 45 slider
Palmer valve
Palmer 12 gram cart reg
PTP warp feed adaptor with cci stock feed gate
Folding Stock

[Impactfour]

Oh hot damn!

[superman]

Started as beat trilogy with some dudes initials carved in the side. I did the milling, feedneck modded, dual detents, minied.
Running a shocktech phat rat, ccm hammer, shocktech springs, ccm pump kit, shocktech old style bolt. Shoots nice and solid. Still need to make a back block to match.

[Gunangel]

Ans GX-5 body, half-block by Jcurt
CCM with T-handle and 86* frame with autotrigger and with CZ grips
CCM feedbeck (red is killing me )
AKA STS regulator
CP bleed on/off
Deadlywind barrel

[Magageddon]

My newest build:

2k WWA body
pre 2k benchmark frame with autococker parts internals
CCM lower tube
Inception reg set at 400psi
2k ccm pumpkit
IN YO FACE stock
Brass Eagle drop out changer

Getting 30 shots at full velocity right now, using her at slims in a few weeks

[Myrkul]

My only sniper/cocker pump.

Nothing too crazy, 2k+ RF with inception drift kit, ACP trigger frame, ACP 15 vert ASA flipped backwards, Shocktech fat hammer, Nova Balanced Valve, Nova guardian reg.

Very consistent over the Chrono, and crazy quiet. Easily my quietest set up. Runs right at 200 psi. I really just need to track down a 14" J&J edge kit tip in dust black for this thing to be perfect. One of these days....lol.

[PBGunny]

She is a pretty old girl, but she still has some fight in her.
Started out life as a Mini Cocker 1441.
Was a replacement from WGP for #0129 which had the threaded barrel section mis-aligned when originally drilled and tapped.
Think I got it in early spring 1993... Was my tourney marker for many years.
About late 1997, PB Sports milled the body, P-blocked and drilled the valve out for 9/16".
Honestly, I can't remember who did the anodize job at that time, but I like the results.
Eventually sold it to a teammate in 2001 who really dinked around with it to the point that he couldn't get it timed and ended up buying the body back in 2003.
Not sure what valve is in it now, either a Shocktech RAT or a Palmer, pretty sure I had a Palmer installed.
CCM Mini Cocker pump kit and CCM trigger frame & beaver tail, WGP grips I acquired somewhere.
Stock bolt, cocking rod is either an AKA or Jackal I had laying around, and a KAPP back block.
MacDev Gladiator reg that matched the anno.
Shocktech ASA I got on sale at one time cause it matches the anno.
Sure wish I had the original machined back block, but it gone to sands of time and getting one machined to match the body would be a task I think.
A unique marker with the original owner.