AutoCocker trilogy recommendations

[Antoneatx]

I just Bought an auto cocker trilogy sport I’m a first time owning an auto Cocker I love upgrading guns so I’m looking for recommendations of what parts to put on this trilogy to make it rip.

[Chuck E Ducky]

Trilly Pro shoot amazing for money. Only thing I would change out is the frame. Nothing wrong with the frames function wise I just prefer a frame that sits closer to the center line of the marker.

They are very reliable when you get them setup right.

[superman]

Feedneck mod, regulator then after that either valve and or springs.

I like the shocktech phat rat valve as it drops the pressure but doesn't require additional maintenance or weird tuning stuff. If you need help with parts or modifications give me a shout.

[superman]

Once the Lpr is set right it doesn;t need to be adjusted. everyone says change it but the only option is palmers lprs or using an ugly adapter.
People are starting to figure it out but phat rats will shoot at 215 psi and only has 1 dynamic seal that isn't even required to function properly.

[Antoneatx]

I looked on your page I like that lower spring kit does that come with an upgraded valve?

[superman]

Not sure which thing you’re looking at, but the spring kits are typically separate from the valve. I do have full lowertube kits if you want to go that route. Shoot me a message if you have any specific questions. Happy to answer them.

[Psycho91]

Might want to consider atleast replacing the stock springs if your not gonna tune it with a kit, the stock springs aernt the best and wear out after a few years of use

[Luscious]

I put a Dye Lazarus valve in mine to get rid of that silly front spring. Also, for cheap, budget friendly upgrades- bought a Gog Enmey reg and On/Off kit (The newest lever style) direct from Gog in the sales. Superb bit of kit

[Law]

A regulator and a lighter springs. Nothing else is needed. The adjustable LPR from palmers make adjustment easy but I agree that you only adjust once so it’s not worth it. If you switch the frame out for something non-WGP you may want the TechT adjustable 3way shaft, but it’s also not worth it.

[JonM]

I’m also a fan of the adjustable timing rods. I tend to keep my Cockers timed pretty tight. These let me do that with Trilogies.

[Psycho91]

Another budget apgrade would be a derlin bolt if yours has the stock metal one, you can find basic stock ones for like $20 or less all day

[Psycho91]

Also keep in mind that the valve spring is long like a spyder hammer spring, superman makes a spacer to allow the use of standard cocker springs though