Pmed
-
Autocockers for life! Primarily a rec ball autococker player but I dabble in speedball with a Planet Eclipse Geo4 or a few of my electronic autocockers. Local to Phoenix, AZ
Ebay feedback 500+ positive, zero negative, account since 2007: https://www.ebay.com/usr/incrediball...?_tab=feedback
MCB Feedback
https://www.mcarterbrown.com/forum/b...t1_32-feedback -
Hello all,
I have made some progress regarding the original material I was using, but have not had it on hand for awhile now.
I think I found some generic shim stock that may be chemically similar, and plan to do some testing soon.
Hoping either original material shows up in bulk soon, or the more plentiful turns out acceptable.
Updates pending shortly.Comment
-
Update: the long awaited material arrived and restock is commencing. I will reach out to those that messaged me.
Comment
-
Everyone that pm’d me should have their order out this morning.
I included some bonus loose ones in two different materials, let me know if you notice a difference from the default material.Comment
-
Would love to grab some if you have these on deck. It won’t let me pm you.Comment
-
Thanks for the heads up. I’ll get some up on current projects soon.
Comment
-
PM’d ya!Comment
-
Sent a PMComment
-
Pm sent.Comment
-
Think you could cut some to fit a Phantom barrel?
It’s a slightly smaller diameter with slightly shorter fingers. Might need to use a thicker material to keep them in place.
I could send you the STL of the dimensions if that helps,Comment
-
It's marginal in phantoms. Not really good at all. Use nail polish or epoxy. I have freedummy ones but there's just not a lot to bottom the barrel on. Maybe some people are okay with it.Comment
-
The free dummy worked just as good as any ASP mod. There is just as much to hold it in place as the cocker ones. I bet they would work great if they were just slightly smaller diameter to match the smaller breach on the Phantom.
The material he uses for the cocker detent rings lasts forever and is super durable. I even put one in my VM and the bolt hammers it on each shot. It’s lasted way longer than I thought it would.Comment
-
On the phantom you have very little breech surface and a thin edge of a barrel to retain the detent. If you tighten the barrel too much they can get smooshed out of place. They were no good to me I don't like tightening the barrel exactly 60pct hand tight.
But if you like em you like em. They weren't for me.Comment
Comment