NEWLY BUILT Mozak Coil Body with Internal Detent $1100 Shipped
Shocktech Lower Tube (Freeflow Cocking Rod since it matches good)
Shocktech Frame with Thicc Plate, Round Lug, and ST Roller Sear (Used sear as they are no longer available)
ST LPR and Inception Pneus
ID HPR
ID On/Off
ID Feedneck
ID Bolt
ID PWR Stella Barrel with 0.675 Insert
Emek - HDE Earth sponge and splash - $ 700 Shipped
This is from the original run done by Blizzard. Very interesting splash and sponge anodizing. I don't know that it particularly looks like HDE Earth but that's what it was called so 🤷♂️. Sort of a green with a copper sponge and bright penny splash.
685 Back with Threaded Stella front
Fang and Secret Pin with FL Valve
POPS ASA
Dirk Gadberry Custom WGP Minicocker - $900 Shipped
This is a pretty interesting new build, on a WGP factory mini-cocker base. Serial number 3943. I believe this to be a Pre-2K minicocker that has been customized.
It has been drilled to 2k spec, including banjo and IVG threading. The feedneck has been modified into a clamp that takes Shocktech rings (Boston Mod). Drilled for detents on both side. The 2K modifications were done by Angry Antle.
This body is P-Blocked with a custom bolt. The length is non-standard, similar to the Works bolts. This bolt is delrin with no o-rings and is beautifully fitted to the body. Very high flowing bolt with an angled inlet. The bolt was made by Chris Nelson of CMN design.
The modernized/feedneck portions are not anodized, but the p-blocking and rail are anodized.
Shoots easily at 300PSI. Incredibly smooth and just delightful to shoot. I am currently investigating who did the original body, but I am quite certain it is a Dirk Gadberry.
Trigger is short and snappy. Less than 3mm pull.
Truly a custom piece of work fitted with:
Classic AA (freaked)
CCM style lowers from ACP
Meteor Single frame wearing SP grips with ST Plate and FF Sear
Inception HPR
Inception ON/Off
Shocktech Ram, ID 3-way, PPS LPR, Lapco flush banjo
Shocktech Lower Tube (Freeflow Cocking Rod since it matches good)
Shocktech Frame with Thicc Plate, Round Lug, and ST Roller Sear (Used sear as they are no longer available)
ST LPR and Inception Pneus
ID HPR
ID On/Off
ID Feedneck
ID Bolt
ID PWR Stella Barrel with 0.675 Insert
Emek - HDE Earth sponge and splash - $ 700 Shipped
This is from the original run done by Blizzard. Very interesting splash and sponge anodizing. I don't know that it particularly looks like HDE Earth but that's what it was called so 🤷♂️. Sort of a green with a copper sponge and bright penny splash.
685 Back with Threaded Stella front
Fang and Secret Pin with FL Valve
POPS ASA
Dirk Gadberry Custom WGP Minicocker - $900 Shipped
This is a pretty interesting new build, on a WGP factory mini-cocker base. Serial number 3943. I believe this to be a Pre-2K minicocker that has been customized.
It has been drilled to 2k spec, including banjo and IVG threading. The feedneck has been modified into a clamp that takes Shocktech rings (Boston Mod). Drilled for detents on both side. The 2K modifications were done by Angry Antle.
This body is P-Blocked with a custom bolt. The length is non-standard, similar to the Works bolts. This bolt is delrin with no o-rings and is beautifully fitted to the body. Very high flowing bolt with an angled inlet. The bolt was made by Chris Nelson of CMN design.
The modernized/feedneck portions are not anodized, but the p-blocking and rail are anodized.
Shoots easily at 300PSI. Incredibly smooth and just delightful to shoot. I am currently investigating who did the original body, but I am quite certain it is a Dirk Gadberry.
Trigger is short and snappy. Less than 3mm pull.
Truly a custom piece of work fitted with:
Classic AA (freaked)
CCM style lowers from ACP
Meteor Single frame wearing SP grips with ST Plate and FF Sear
Inception HPR
Inception ON/Off
Shocktech Ram, ID 3-way, PPS LPR, Lapco flush banjo
Comment