RKJ Full Body Merlin - $2400 (hard to price this, but trades possible)
Looks like a classic AKA round body but with 3 pill milling. This one has a lot of minor customization by Ryan Jamieson as it was his personal marker.
It has a milled in
Includes an extra front block. The front block installed had an error corrected on the LPR threading and it's LPR threads are raw. Replacement block is just like the one currently installed. Nothing wrong with the current installation at all, just a bonus due to the internal error. Ryan never swapped it, and neither did I.
Gunfighter frame, don't remember if the hammer is AKA or Shocktech. AKA valve of course.
One of a kind, pictured with one of my pullpins, but matching AKA pull pin will be installed before shipment. May have a couple other small matching parts Definitely have a matching powder blue front. Will double check and update.
β
Gloss solid Grey 2021 Freeflow Reflex - New - 1000 Shipped
My personal gun from this run.
Never used in a game.
Beavertail Shortened slightly.
Detent Loctited
Some minor tuning to my preferences but I literally never use this over my Boxxer. It hasn't even been used in a game. It looks great and shoots great, and I have shot it in my yard, but I guess I just like trashier looking guns.β
Shocktech STR - Red Acid - $1200 Shipped
Really nice, excellent anodizing and milling. Really a great gun.
Includes a set of inserts in case.
Emek - HDE Earth sponge and splash - $ 700 Shipped
This is from the original run done by Blizzard. Very interesting splash and sponge anodizing. I don't know that it particularly looks like HDE Earth but that's what it was called so π€·ββοΈ. Sort of a green with a copper sponge and bright penny splash.
685 Back with Threaded Stella front
Fang and Secret Pin with FL Valve
POPS ASA
Etha 3M - Tri-tone Sponge and Splash Polished New - 1000 Shipped
Lots of matching parts and a beautiful ano job.
Fang, EZPZ, PWR (.685 insert), Secret Pin
Dirk Gadberry? Custom WGP Minicocker - $1000 Shipped
This is a pretty interesting new build, on a WGP factory mini-cocker base. Serial number 3943. I believe this to be a Pre-2K minicocker that has been customized.
It has been drilled to 2k spec, including banjo and IVG threading. The feedneck has been modified into a clamp that takes Shocktech rings. Drilled for detents on both side. The 2K modifications were done by Angry Antle.
This body is P-Blocked with a custom bolt. The length is non-standard, similar to the Works bolts. This bolt is delrin with no o-rings and is beautifully fitted to the body. Very high flowing bolt with an angled inlet. The bolt was made by Chris Nelson.
The modernized/feedneck portions are not anodized, but the p-blocking and rail are anodized.
Shoots easily at 300PSI. Incredibly smooth and just delightful to shoot. I am currently investigating who did the original body, but am not certain. If you do have info on this body, please let me know. Likely a Dirk Gadberry but not confirmed.
Truly a custom piece of work fitted with:
Inception PWR Barrel with choice of insert.
CCM style lowers from ACP
Inception Rip Frame
Inception HPR
Inception ON/Off
Shocktech Ram, ID 3-way, PPS LPR, Lapco flush banjo
RKJ Tribute Minicocker - $1000 Shipped
Used- Just took this all apart to respring and tune, new valve, medium heavy hammer. Nice light action now. Runs 300-350 PSI.
Freaked back with DYE tip
ANS Frame
ST 3-way
AKA Reg
FF Ram
Looks like a classic AKA round body but with 3 pill milling. This one has a lot of minor customization by Ryan Jamieson as it was his personal marker.
It has a milled in
Includes an extra front block. The front block installed had an error corrected on the LPR threading and it's LPR threads are raw. Replacement block is just like the one currently installed. Nothing wrong with the current installation at all, just a bonus due to the internal error. Ryan never swapped it, and neither did I.
Gunfighter frame, don't remember if the hammer is AKA or Shocktech. AKA valve of course.
One of a kind, pictured with one of my pullpins, but matching AKA pull pin will be installed before shipment. May have a couple other small matching parts Definitely have a matching powder blue front. Will double check and update.
β
Gloss solid Grey 2021 Freeflow Reflex - New - 1000 Shipped
My personal gun from this run.
Never used in a game.
Beavertail Shortened slightly.
Detent Loctited
Some minor tuning to my preferences but I literally never use this over my Boxxer. It hasn't even been used in a game. It looks great and shoots great, and I have shot it in my yard, but I guess I just like trashier looking guns.β
Shocktech STR - Red Acid - $1200 Shipped
Really nice, excellent anodizing and milling. Really a great gun.
Includes a set of inserts in case.
Emek - HDE Earth sponge and splash - $ 700 Shipped
This is from the original run done by Blizzard. Very interesting splash and sponge anodizing. I don't know that it particularly looks like HDE Earth but that's what it was called so π€·ββοΈ. Sort of a green with a copper sponge and bright penny splash.
685 Back with Threaded Stella front
Fang and Secret Pin with FL Valve
POPS ASA
Etha 3M - Tri-tone Sponge and Splash Polished New - 1000 Shipped
Lots of matching parts and a beautiful ano job.
Fang, EZPZ, PWR (.685 insert), Secret Pin
Dirk Gadberry? Custom WGP Minicocker - $1000 Shipped
This is a pretty interesting new build, on a WGP factory mini-cocker base. Serial number 3943. I believe this to be a Pre-2K minicocker that has been customized.
It has been drilled to 2k spec, including banjo and IVG threading. The feedneck has been modified into a clamp that takes Shocktech rings. Drilled for detents on both side. The 2K modifications were done by Angry Antle.
This body is P-Blocked with a custom bolt. The length is non-standard, similar to the Works bolts. This bolt is delrin with no o-rings and is beautifully fitted to the body. Very high flowing bolt with an angled inlet. The bolt was made by Chris Nelson.
The modernized/feedneck portions are not anodized, but the p-blocking and rail are anodized.
Shoots easily at 300PSI. Incredibly smooth and just delightful to shoot. I am currently investigating who did the original body, but am not certain. If you do have info on this body, please let me know. Likely a Dirk Gadberry but not confirmed.
Truly a custom piece of work fitted with:
Inception PWR Barrel with choice of insert.
CCM style lowers from ACP
Inception Rip Frame
Inception HPR
Inception ON/Off
Shocktech Ram, ID 3-way, PPS LPR, Lapco flush banjo
RKJ Tribute Minicocker - $1000 Shipped
Used- Just took this all apart to respring and tune, new valve, medium heavy hammer. Nice light action now. Runs 300-350 PSI.
Freaked back with DYE tip
ANS Frame
ST 3-way
AKA Reg
FF Ram
Comment