I have this listed on my eBay account and will remove that listing before sending any PayPal information.
Looking for 1600, price is pretty firm and doesn't include shipping.
The description is the same as my eBay listing and details some issues.
This is a low serial number (017) T9.1 with a lot of extras. There are 6 T9.1 mags, 1 T8.1 mag, and 4 T8 mags modified to fit. I haven't tested the T8 mags other than making sure they engage the Lapco extended magazine catch. The original TA stock is included as well as a Killjoy Industries R.O.C. (Reversible, Offset, Collapsible) stock. There is a Hawke compound bow scope mounted on the Killjoy A.P.R. (Adjustable Picatinny Rail). The original barrel with removable faux suppressor and a Lapco rifled FSR barrel with removable Lapco loudener are included and both barrels have idiot marks that are not visible when installed that were caused by the front shroud screw being too far in. The barrel tips are the same thread and interchangeable. The front shroud is a very tight fit on the Lapco barrel. There are spare detents, the original magazine catch, and the original CO2 stem to allow the use of 12 grams in the magazines. There is also a Tiberius Arms vest, 10 Milsig mag pouches, a folding foregrip, a new remote line and a new Valken tank pouch.
The reason this is being listed as not working is because this isn't a pull it out of the box and go play type of marker, depending on how you want it set up it may need to be modified. FS rounds are extremely finicky, I have never had good luck with them and I don't really have a field to go to that allows them so there isn't much reason for me to keep this. They did seem to do OK without the front shroud but that was a small test with just one mag, I suspect it's causing the barrel to be slightly tilted and causing the misfeeds.
EDIT: I was able to test this more recently and without the front shroud it feeds fine with FS rounds in the T9.1/T8.1 mags, the T8 mags also fed fine with round balls, so it is just the front shroud that is causing feeding issues.
Looking for 1600, price is pretty firm and doesn't include shipping.
The description is the same as my eBay listing and details some issues.
This is a low serial number (017) T9.1 with a lot of extras. There are 6 T9.1 mags, 1 T8.1 mag, and 4 T8 mags modified to fit. I haven't tested the T8 mags other than making sure they engage the Lapco extended magazine catch. The original TA stock is included as well as a Killjoy Industries R.O.C. (Reversible, Offset, Collapsible) stock. There is a Hawke compound bow scope mounted on the Killjoy A.P.R. (Adjustable Picatinny Rail). The original barrel with removable faux suppressor and a Lapco rifled FSR barrel with removable Lapco loudener are included and both barrels have idiot marks that are not visible when installed that were caused by the front shroud screw being too far in. The barrel tips are the same thread and interchangeable. The front shroud is a very tight fit on the Lapco barrel. There are spare detents, the original magazine catch, and the original CO2 stem to allow the use of 12 grams in the magazines. There is also a Tiberius Arms vest, 10 Milsig mag pouches, a folding foregrip, a new remote line and a new Valken tank pouch.
The reason this is being listed as not working is because this isn't a pull it out of the box and go play type of marker, depending on how you want it set up it may need to be modified. FS rounds are extremely finicky, I have never had good luck with them and I don't really have a field to go to that allows them so there isn't much reason for me to keep this. They did seem to do OK without the front shroud but that was a small test with just one mag, I suspect it's causing the barrel to be slightly tilted and causing the misfeeds.
EDIT: I was able to test this more recently and without the front shroud it feeds fine with FS rounds in the T9.1/T8.1 mags, the T8 mags also fed fine with round balls, so it is just the front shroud that is causing feeding issues.
Comment