I acquired a decent size lot of Armson guns a couple months ago. The lot consisted of Armson Paintball Rifles and Armson Semi paintball guns. I have spent most of the time since cleaning/repairing, finding parts and learning a lot about these guns. You might see them on eBay, but obviously contact me here if you have any interest in one. I’ll do my best to give you the pick of the litter based on what I have.
Every gun has been disassembled, some seals replaced and most of the dirt and grime cleaned out. I did not completely disassemble the grip frames. Each gun has also been aired up and tested for leaks and basic functionality. They will be tested one more time prior to shipping.
Each gun will come with a parts kit. All spare parts are brand new. Some of them are hard to find parts, others not so much. The parts kit is subject to change, in your favor, as I continue to track down additional spare parts for these guns.
SEMI
The picture shows the guns I currently have as of this posting. I have no problem moving parts around based on what you want and can build and show you the exact gun you want prior to shipping, although I have kinda already done that and the 5 on the bottom are the nicer ones.
Most have an older powertube seal that probably won’t last too long. I will change it out if it’s leaking, but leave it in if it’s still working. This is a “hard to find” part. The parts kit will include brand new powertube seals.
I sent a barrel to BMC for freak boring to test. He was able to do it no problem. Only issue was that the Semi bolt will get stuck in a small insert. It was anything below .684 with mine. I did a little sanding of the last 1/4” of the bolt tip and it was fixed and worked fine.
Armson Semi + parts kit. $500 shipped
RIFLE
Some of these are not quite getting up to velocity. So a little tuning and tinkering might be necessary. Probably just a combination of old springs and a ‘90s barrel with a huge bore. A new factory mainspring is included in the parts kit.
All of these guns have a unique powertube setup currently installed. This is how they showed up. They work as is, but I was able to get the “newest” powertubes and hammers and am including those in the parts kit. If you change them out, the sear and cup seal will need to be transferred from the old setup.
I also sent one of these barrels to BMC for freak boring to test. Again, he was able to do it no problem. And I had no issues shooting the gun with a freak insert.
Armson Paintball Rifle + parts kit. $220 shipped
Not really interested in trades at this time.
![Click image for larger version
Name: 35236BAF-A60E-478E-8869-D9B8B25DEFBF.jpeg
Views: 786
Size: 3.10 MB
ID: 158489](filedata/fetch?id=158489&d=1628306832)
Every gun has been disassembled, some seals replaced and most of the dirt and grime cleaned out. I did not completely disassemble the grip frames. Each gun has also been aired up and tested for leaks and basic functionality. They will be tested one more time prior to shipping.
Each gun will come with a parts kit. All spare parts are brand new. Some of them are hard to find parts, others not so much. The parts kit is subject to change, in your favor, as I continue to track down additional spare parts for these guns.
SEMI
The picture shows the guns I currently have as of this posting. I have no problem moving parts around based on what you want and can build and show you the exact gun you want prior to shipping, although I have kinda already done that and the 5 on the bottom are the nicer ones.
Most have an older powertube seal that probably won’t last too long. I will change it out if it’s leaking, but leave it in if it’s still working. This is a “hard to find” part. The parts kit will include brand new powertube seals.
I sent a barrel to BMC for freak boring to test. He was able to do it no problem. Only issue was that the Semi bolt will get stuck in a small insert. It was anything below .684 with mine. I did a little sanding of the last 1/4” of the bolt tip and it was fixed and worked fine.
Armson Semi + parts kit. $500 shipped
RIFLE
Some of these are not quite getting up to velocity. So a little tuning and tinkering might be necessary. Probably just a combination of old springs and a ‘90s barrel with a huge bore. A new factory mainspring is included in the parts kit.
All of these guns have a unique powertube setup currently installed. This is how they showed up. They work as is, but I was able to get the “newest” powertubes and hammers and am including those in the parts kit. If you change them out, the sear and cup seal will need to be transferred from the old setup.
I also sent one of these barrels to BMC for freak boring to test. Again, he was able to do it no problem. And I had no issues shooting the gun with a freak insert.
Armson Paintball Rifle + parts kit. $220 shipped
Not really interested in trades at this time.
Comment