Paintball STL Repository

[romeoecho84]

Replacement Revy Lid available in 3MF and STL posted to Makerworld

https://makerworld.com/en/models/306...ion-loader-lid

Update* - Added in a profile where the flip-lip is on the bottom, as normal. It does take some supports removal efforts, but nothing 'too' crazy. ASA and PC profiles added

[Levi]

You're welcome! Let me know how it works on your printer. I know dutchcommando and probably a couple others were eyeing these as well.

[lhamilton1807]

Thanks for sharing! I remember drooling over this at SuperGame

[Levi]

I got tired of my O-rings migrating under the removable dividers and created these boxes to fit a Plano 3771-00 CDS tackle/organizer box. These keep all my seals and small parts nicely contained and easy to access.





Files are currently posted on:

• Printables: https://www.printables.com/model/171...es-for-plano-3
• Maker World: https://makerworld.com/en/models/279...fileId-3106853

[Rainmaker]

Cross-posted on thingiverse ( https://www.thingiverse.com/thing:7318494 )
I think i will stick with thingiverse for paintball stuffs

[uv_halo]

The closest to this I've seen is the Inception Designs Pico Loader (https://www.zdspb.com/tech/misc/cadf...t/loaders.html).

[Rainmaker]

I know a few people have asked for these over the years, and i've held them hostage long enough!

JT ER2 and ER2s Freak insert parts:
https://makerworld.com/en/models/253...-adapter-parts

[flyweightnate]

Shows how much I know about slicers, etc. Lemme see if I can attach a step shortly.

[dozernaut]

[ATTACH]n775788[/ATTACH]

Let's see if this works...

The export is a low poly count. Most slicers now-a-days can handle STEP imports so you don't have to deal with facets on curved surfaces.

[flyweightnate]

Pierce Driver Tool.zip

Let's see if this works...

[Spaghetti Overdrive]

That will snap off instantly

[Daytonastreetlights]

Tippmann 68 Carbine Foregrip.
https://makerworld.com/en/models/215...fileId-2339653

The tab that the front body bolt is designed to go thru keeps it loosely fitted to the front of the marker. However, there are two holes in the underside I added for 1/4-20 SOFT tip set screws to be added for a more secure fit. I have yet to test this method beyond threading the holes. That is the reason I left this bit of info out of the model on Makerworld. If you opt to use the set screw holes you may risk damaging your barrel, so do this at your own risk.

[LackadaisyJackie]

https://www.thingiverse.com/thing:7144458

I made a tank holster for my 10rd tubes!

[lhamilton1807]

I’d love to see one

[tygersrule]

Has anyone 3d printed a shell replacement for the halo b/invert reloader too etc hopper line?