Phantom breech model question

[Jordan]

Has anyone modeled a Phantom breech block that accepts a 10rnd tube directly? Maybe they already do without mods, I haven't tried with mine.

I need one for a project I'm working on, and figured if one was already modeled up it would be easier for whoever I can get to print one for me. (Cough cough Alexndl ) 😉

[Jonnydread]

I know that the standard SC feeds can act as a cram & jam, but I've never seen one where you just jam a tube into the breach.

[BrickHaus]

My thought went to an open class body and cram the tube into the feedneck

[Jordan]

Breech block*. Guess I should have been more specific.

[Grendel]

Phantoms OC Feed Necks are too small for cram/jam they always required an adapter unlike a lot of the other Nelson Clones that used larger OC Feed Necks

[RAZRBAKK]

IF someone decides to work on this, I would gladly pick one up.

[Jordan]

It's for a project I'm working on, in case this sparks interest....

I'm converting a Crosman 2240 series .22 cal pistol into a modular Sheridan clone.... everything will bolt together vs. being soldered.

So far I'm at this:



I started with a piece of .750 ID tubing and pressed a piece of barrel tube into place for the breech... it's going to accept Freak inserts as well, and likely have a bolt-on breech block so I can run 10rnd tubes or single shot.

Still deciding on bolt-action or pump.

[Dirty11]

Wow. Great minds and all that. I just bought a 2240 with similar plans in mind. Looks like your farther into then I. I've only ripped some pellets into a roll of paper towels.

[Jordan]

Wow. Great minds and all that. I just bought a 2240 with similar plans in mind. Looks like your farther into then I. I've only ripped some pellets into a roll of paper towels.

Nice! Looking forward to seeing what you do.

My goal is to keep the mod 100% reversible so I can still plink at targets/squirrels/etc. Lots of cool stuff for the 2240, too - longer barrels, stocks, HPA conversions.